Cisco Systems NM-16AM-V2, NM-8AM-V2 manual Verifying the Modem Configuration, Troubleshooting Tips

Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92

How to Configure the Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules

Verifying the Modem Configuration

Perform the following tasks to verify the modem configuration.

SUMMARY STEPS

1.enable

2.show modem version

3.debug modem

4.show modem version

5.exit

DETAILED STEPS

	Command or Action	Purpose
Step 1
	enable	Enables privileged EXEC mode.
		• Enter your password if prompted.
	Example:
	Router> enable
Step 2
	show modem version	Displays the modem firmware version and datapump
		version.
	Example:
	Router# show modem version
Step 3
	debug modem	Displays the modem events and state transitions.
	Example:
	Router# debug modem
Step 4
	show modem version	Displays the modem firmware version, the datapump
		version, and the firmware log.
	Example:
	Router# show modem version
Step 5
	exit	Exits privileged EXEC mode.
	Router# exit

Troubleshooting Tips

Use the following debug commands to troubleshoot the modem:

•debug async state

•debug dialer

•debug dialer forwarding

•debug dialer map

•debug dialer packets

Cisco IOS Release 12.3(7)T

6