Oregon Scientific PS-L01U user manual Trends, SET Unit, Continuous Backlight

Page 19

TRENDS

The trend arrow for the last 30 minutes always displays. Indoor and outdoor temperature and humidity trends are shown separately.

EN

SET UNIT

While in Temperature / Humidity Mode, press SELECT for 2 seconds. Press UP or DOWN to switch between °C and °F. Press SELECT to confirm.

Trend	Temperature	Relative Humidity
	+0.5 °C	+3%
	Steady	Steady
	-0.5 °C	-3%

PS-L01_GB-final

19

BACKLIGHT

Press SNOOZE/LIGHT to illuminate the backlight for 5 seconds.

CONTINUOUS BACKLIGHT

The AC power adapter must be plugged in to use this feature (→ 8).

1.The BACKLIGHT switch is located in the battery compartment. Move it to the “ON” position to enable the continuous backlight. Move it to the “OFF” position to disable.

17

8/8/03, 11:35 AM

Image 19

Contents PS-L01GB-final 03, 1135 AM PS-L01GB-final 03, 1135 AM Table of Contents About this Guide TOP View Descriptions Product OverviewLCD Display Descriptions Back View Button Descriptions Bottom View Descriptions Remote Unit Batteries AC Power AdapterSwitch Between Modes Getting StartedRemote Unit SET UP Change SettingsInstallation Clock To Disable or Enable Auto SynchronizationReception SET or Change the Clock AlarmSET Alarm To Turn the Alarm OFF or onCalendar Moon PhaseSET Date Barometric Trend BarometerView the Last 24 Hours SET Unit and Altitude Temperature and HumidityWeather Forecast Select Remote Unit Channel Clear MIN / MAX MeasurementsSensor Searching Comfort Zone Continuous Backlight TrendsSET Unit BacklightSafety and Care Reset SystemTroubleshooting Calendar Temperature SpecificationsBarometer Additional Resources Radio-controlled clockEC-DECLARATION of Conformity