IBM OS/390 manual Summary of JES2 Jecl a Table, 1 of 2. JES2 Control Statements

Table 9 (Page	2 of 2). Overview of POWER JECL Statements
POWER	Function	JES2 or MVS Equivalent
Statement
* $$ FLS	Indicates that a VSE/POWER job	/*PURGE if INTRDR
	should be terminated by
	internal flushing.
* $$ JOB	Indicates the beginning of a	// JOB
	VSE/POWER job and specifies
	the routing of jobs, output, and
	notify messages.
* $$ LST	Provides handling information	// OUTPUT, /*OUTPUT, or // DD
	for printer output; routes list	SYSOUT=x, DEST=destination
	output to a node.
* $$ PUN	Provides handling information	// OUTPUT, /*OUTPUT, or // DD
	for punched output; routes	SYSOUT=x, DEST=destination
	punch output to a node.
* $$ RDR	Inserts a diskette file into the	No equivalent in OS/390.
	input stream.
* $$ SLI	Inserts data from an accessible	// INCLUDE
	library.
* $$ /*	Indicates the end of a VSE job	No equivalent in OS/390.
	step (used with the SLI
	statement only).
* $$ /&	Indicates the end of a VSE job	No equivalent in OS/390.
	(used with the SLI statement
	only).
/*$SLI	Indicates end of input data for	No equivalent in OS/390.
	an SLI member.

4.4.3 Summary of JES2 JECL - A Table

Table 10 (Page 1 of 2). JES2 Control Statements

Statement	Purpose	Comments
/*$command	Enters JES2 operator
	commands through the input
	stream.
/*JOBPARM	Specifies certain job-related	Use parameters on the // JOB
	parameters at input time.	statement instead.
/*MESSAGE	Sends messages to the	Seldom used.
	operator via the operator
	console.
/*NETACCT	Specifies an account number	Seldom used.
	for a network job.
/*NOTIFY	Specifies the destination of	Use NOTIFY on the // JOB or //
	notification messages.	OUTPUT statements.
/*OUTPUT	Specifies processing options for	Use the // OUTPUT JCL
	SYSOUT data set(s).	statement instead.
/*PRIORITY	Assigns a job queue selection	Use PRTY= on the // JOB
	priority.	statement instead.
/*ROUTE XEQ	Specifies the execution node	Use the /*XMIT statement as
	for the job.	an alternative.

90VSE to OS/390 Migration Workbook