1 - LT Series Operations Manual
TABLE OF CONTENTS |
|
Specifications | 2 |
Introduction | 3 |
LT Series Models | 4 |
Optional Features | 4 |
Getting Started | 5 |
Installation | 5 |
Registration | 5 |
Setting the Type Wheels | 6 |
Setting the Digital Display | 7 |
Adjusting Print Impact | 8 |
Repeat/Advance Operation | 8 |
Consecutive/Duplicate Count | 9 |
Adjusting the Registration Position | 10 |
Changing the Ribbon | 11 |
Changing the Fuse | 12 |
Changing the Platen | 13 |
Warranty | 14 |
WARNING: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing devise pursuant to Subpart J of part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of the equipment in a residential area is likely to cause interference, in which case, the user, at his own expense, will be required to take whatever measures may be required to correct the interference.
This document is a confidential proprietary document for the sole use of Lathem Time customers. The information contained herein may not be reproduced for any purpose without the written permission of Lathem Time Corporation.
Copyright © 2009
LATHEM TIME CORPORATION
200 Selig Drive SW., Atlanta, Georgia 30336