Resizing a Field (Free Design Template)
Use the procedures in this section when you want to change the size of a field.
Important!
Note that the result obtained when you resize a field depends on whether it is a text field or an image field.
1.Select the field you want to resize so it is enclosed by a gray selection boundary.
2.Use one of the techniques described below to drag one of the four corner handles on the boundary to resize the field.
Example: Simple drag operation
J
•Simple Drag Operation
Simply dragging a corner handle resizes the field, without maintaining its aspect ratio.
•[Shift] + Drag
This resizes the field while maintaining its aspect ratio. The field is enlarged or reduced with the corner that is diagonally opposite from the one you are dragging fixed.
•[Shift] + [Ctrl] + Drag
This also resizes the field while maintaining its aspect ratio. The field is enlarged and reduced with its center fixed.
Important!
Resizing a text field does not affect the size of the text inside the field.
J
55