Casio LPCW-100 manual Your CD drive does not

Symptom	Possible Cause	Recommended Action
● Printing color is	The color of the final	Try using a lighter color
different from	printout is affected by	disc or a darker color ink
what I expected.	both the color of the ink	ribbon.
	ribbon and the color of
	the disc you are printing
	on.
● Printing is	Improper alignment of	Use the printing guide
misaligned.	the disc in the tray.	when aligning the disc in
		the tray (page 18).
● Cannot print.	The ink ribbon is used	Replace the ink ribbon
	up.	cassette with a new
		one.*
	The driver is not	1. [Start], [Control
	installed correctly.	Panel], [System], and
		then [Device Manager].
		2. Check if [CW100
		Device] is displayed
		under [Universal Serial
		Bus controllers].
		• If you see a question
		mark (?) or
		exclamation point (!)
		next to [CW100
		Device], disconnect the
		USB cable from your
		computer, and re-install
		this CD/DVD LABEL
		PRINTER application.
		Installing the
		application also installs
		the driver. After
		reinstalling, reconnect
		the USB cable.

Symptom	Possible Cause	Recommended Action
● The last part of	Too many characters	Use a smaller font size
input data does	per line	or reduce the number
not print.		of characters per line.
	Too many lines	Use a smaller font size
		or reduce the number
		of lines.
● Cannot import	The music CD you are	Type text manually into
CD-Text.	trying to import from	the label input boxes, or
	does not have any CD-	find a Website on the
	Text on it.	Internet that contains
	Your CD drive does not	the data you want to
		include on the label,
	support reading of CD-
		copy it, and then paste
	Text.
		it into the label input
		boxes.
● Cannot create	The specified drive or	Remove the write
a data index	media where you are	protection or delete
file.	trying to save the data	data you no longer need
	is write protected or	to make room from the
	full.	data index file. Other
		options include
		switching to a different
		drive or different media.

*See the printer User’s Guide.

66