Casio CTK-900, WK-3200, WK-3700 manual Hold1 40H

10.7General Use Controllers 1 through 8 (10H through 13H, 50H through 53H)

Format

Message Format:	BnH 10H vvH				DSP Parameter 0
	BnH	11H	vvH		DSP Parameter 1
	BnH	12H	vvH		DSP Parameter 2
	BnH	13H	vvH		DSP Parameter 3
	BnH	50H	vvH		DSP Parameter 4
	BnH	51H	vvH		DSP Parameter 5
	BnH	52H	vvH		DSP Parameter 6
	BnH	53H	vvH		DSP Parameter 7
	n:MIDI Channel Number (Note 1)
	vv:Value		(Note	2)

Note 1:MIDI Channel Number

The MIDI Channel for manipulating DSP parameters with control change messages is called the "Global Channel". The initial factory default Global Channel is Channel 1.

The Global Channel cannot be changed with a control panel operation. You need to use a System Exclusive Message to change the Global Channel. For details about messages, "Global Channel" under "21.1 Patch Common Parameter List".

Note 2:Value

The range for a value that can be sent by any of the parameters is 0 to 127. Note, however, that the parameter values that can actually be set and the corresponding send value depend on the parameter.

Send

Sent when the WK-3200 modulation button or WK-3700 modulation wheel assigned to a DSP Parameter is operated, and when this Model's DSP edit function is used to change the DSP Parameter value.

Receive

Receipt changes the DSP Parameter value. Any message received that corresponds to a parameter whose number exceeds the number of parameters for the currently selected DSP is ignored.

10.8Hold1 (40H)

Format

Message Format: BnH 40H vvH

n: MIDI Channel Number

vv: Value (Note 1)

Note 1:

For information about the relationship between setting values and send/receive values, see the "42.1 Off/On Setting Value Table" in "Part VIII Setting Values and Send/Receive Values."

Send

Sent when the assignable jack is configured for sustain and the connected pedal is operated.

Receive

Receipt performs an operation equivalent to a sustain pedal operation.

13