Casio CTK-900 Parameter Lists, Command Parameters, System Parameter List, System Exclusive Format

Part V

Parameter Lists

These lists show the parameters that can be transferred individually using System Exclusive Messages.

•Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be used for obtaining status information only. A parameter with "w" next to its Parameter ID is a write-only parameter, which is used for commands, etc.

•Note 2: All values in the System Exclusive Format table are hexadecimal. Except for the "Setting Value" column, all values in the Parameter Lists are hexadecimal, unless specifically noted otherwise.

•Note 3: Receipt of a value outside a specified range causes the value marked "Default" to be used instead.

20 Command Parameters

The parameters defined here mainly execute commands and indicate statuses. Values indicate the pointer to a command or a status.

20.1System Parameter List

System Exclusive Format

	Field		Value
01		SYSEX	F0
02		MAN	44
03		MOD	11,02
04		dev	Either 00 to 1F, or 7F
05		act	00(IPC),	01(IPR)
06		cat	Command	= 0
07		prm	00-7F
08		ilen/dlen	0 / bit size - 1
09		ps	LSB,MSB	= 00, 00
10		index	00
11		data	See the Parameter List
12		sum	None
13		EOX	F7

43