Casio KL-8100 manual

Page 20

∑Be sure to grasp the plug of the AC adaptor cord when disconnecting it. Never pull on the cord.

Loading/Replacing Batteries

A handy low battery power indicator lets you know when battery power is getting too low for proper operation. The message LOW BATTERY or REPLACE BATTERIES appears on the display if battery power is low when you perform any of the following operations.

∑Switching power on

∑Executing a print operation

∑Executing a tape feed operation

You should still be able to perform some Label Printer operations, but some power intensive operations (like printing or tape feed) may become impossible if battery power is too low. In any case, you should replace batteries as soon as possible or switch to the AC adaptor as soon as possible after the LOW BATTERY message appears.

Important!

Batteries can burst or leak and damage your unit if you use them the wrong way. Note the following important points.

∑Be sure that the plus (+) and minus (–) sides of each battery are facing correctly.

∑Never mix batteries of different types

∑Never leave dead batteries in the battery compartment.

∑Remove the batteries if you do not plan to use the unit for a long time.

∑Replace the main battery in accordance with the battery life marked on the side of the battery.

∑Have the back-up battery replaced by the date noted on the sticker on the back of the label printer.

Warning!

∑Never recharge the batteries you use with this unit.

∑Do not expose batteries to direct heat, do not short circuit them, and do not try to take them apart.

∑Keep batteries out of the reach of small children. If swallowed, consult with a physician immediately.

∑Low battery power is indicated by poor print quality or power switching off while printing is in progress.

Loading/Replacing the main batteries

1.Switch power off.

∑If you are using the AC adaptor to power the unit, you should also unplug the adaptor from the Label Printer.

2.Open the battery compartment cover on the back of the Label Printer by sliding it in the direction indicated by the arrow.

3.If you are replacing batteries, remove all eight of the old batteries.

4.Load a set of eight new batteries into the battery compartment, making sure that their positive (+) and negative (–) ends are facing in the correct directions.

5.Replace the battery compartment cover.

Turning Power On and Off

Press ON to turn power on, and OFF to turn power off.

Important! If you are using the label printer for the first time, you should reset it first.

Power On Recall Function

Whenever you turn power off, any input that is on the display is automatically stored in memory. Then the next time you turn on power, the message ”[SET] TO

Page 19 Page 21
Image 20
Page 19 Page 21
Contents About safety precaution symbols KL-8100Examples Memory Quick Reference ContentsIntroduction Important Precautions Power SupplyLabel Printer Menus AC AdaptorTurning Power On and Off Power On Recall FunctionResetting the Memory Auto Power Off FunctionRemoving the Tape Cartridge About the SET UP menu Message LanguageDisplay Contrast SoundDisplay Symbols and Indicators To use the Symbol menu Manual feed indicatorBasic Alpha-Numeric Input About the Code keyInputting Illustrations User CharactersMoving the Cursor Deleting Individual CharactersClearing the Display Text EditingTo switch between overwrite and insert Text Effects Part 6 Character SizesPart 8 Printing Part 9 FramesPart 12 Memory Part 14 ReferencePage Page ∑ Contact a nearby dealer whenever you require servicing Page Page Tape Cartridges SET SET Page Page Caps off Example To input á Code 1 ´ a SET Page Page Fonts Character Styles Text EffectsDirect Specification of Character Sizes About the format menu To change character size using direct specificationSmall Typeface To find out preset format character sizes About Auto SizingUsing the Layout Display Fundamentals of Label LayoutCreating and Deleting Blocks Block OperationsDirection To display the ALL Form menu All Text OperationsPrinting Precautions Using the Image DisplayTo adjust the print density Printing a TapeTo display the Presets menu To specify a frame around the printing areaTo specify frames around each character To show the image displayTo recall a preset layout label from memory To use a preset layout to create a label and print itTo store a label created using a preset layout To delete a preset layout label from memory To print a large-size labelBar Code Tape To print a bar codeTo store a bar code To recall a bar code from memoryTo delete a bar code from memory To print sequentially numbered labelsTo print a preset phrase To create a new stamp labelTo store a numbering format To recall a numbering format from memoryTo store a stamp label To recall a stamp label from memoryTo delete a stamp label from memory To store dataCleaning the Printer Head and Roller Initial SettingsTo recall memory text using character search To clean the printer head and rollerFormat Indicator Tape Length IndicatorIllustrations Symbols, Dingbats, and Special Characters Initializing the Label PrinterFrames Fonts Enlarged Label MeasurementsBar Code Specifications TroubleshootingPower Supply PhrasesText Input Tape Cutting Using Labels Data Communication Error Messages Specifications
Related manuals
Manual 31 pages 37.09 Kb
Top Page Image Contents