Casio DT-X11 Series manual FCC Warning

Page 12

GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas).

NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Proper connectors must be used for connection to host computer and/or peripherals in order to meet FCC emission limits.

 

Peripherals and Cables

 

AC Adaptor (AD-S42120A)

 

Communication Card Cover (DT-892TCV)

 

Communication Card Cover (Large size) (DT-893LTCV)

 

CF Card Extension Unit (DT-894CFU)

 

Cables (DT-887AXA, DT-888RSC, DT-380USB)

 

 

 

 

 

Declaration of Conformity

Model Numbers:

DT-X11M30U, DT-160IOE, DT-167CHGE, DT-169CHGE, DT-5022CHG

Trade Name:

CASIO

Responsible party: CASIO, INC. Industrial Handheld Division

Address:

2700 Augustine Drive Suite 155, Santa Clara, California 95054

Telephone number:

408-737-6300

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The equipment generates and radiates radio-frequency energy.

SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65, Supplement C and guidelines established in IEEE C95.1-1991.

We, the undersigned.

Company

CASIO Europe GmbH

Address, City

Bornbarch 10, D-22848 Norderstedt

Country

Germany

Phone number

+49(0)40-528-65-0

Fax number

+49(0)40-528-65-424

certify and declare under our sole responsibility that the following equipments:

E-10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Series Page Safety Precautions Markings and SymbolsPrecautions During Use Disassembly and ModificationForeign Objects Dropping and DamageMoisture Laser LightLocation Heavy ObjectsLCD Screen Optional Lithium-ion Battery Pack Page AC Power Supply Backup Copies of All Important Data AC AdaptorOperating Precautions Warranty and After Service FCC Warning 0984 Contents Using PC Card DT-X11M30E / M30U / M10E Before Getting Started Using the stylus Handheld Terminal System Configuration Cradle-type Battery ChargerBridge Satellite Cradle Wall Mount UnitBattery Pack Dual Battery ChargerCF Card Extension Unit CablesCommunication Card Covers General Guide Page Replacing the Battery Replacing the Battery PackAlways keep backup copies of all important data To replace the battery pack Page Attaching the Wrist Strap To attach the wrist strapConfiguring Handheld Terminal Settings Calibrating Touch Screen AlignmentAdjusting Display Contrast Adjusting Display BrightnessDisplay Auto Dimmer Using the C-MOS Imager C-MOS Imager models only Barcode and 2-dimensional code Reading GuideAbout the Class 1 LED Label Using the Laser Scanner Laser Scanner models only Bar Code Scanning Position Never look directly into the laser lightPerforming Communication IR CommunicationBluetooth Communication Resetting the Handheld Terminal If reset does not find a memory problemIf reset finds a memory problem Performing a Full Reset Initialization To perform a full resetDT-X11 Specifications MOS Imager DT-X11M30E/M30U/M30RCEarphone Jack Using the Bridge Satellite Cradle DT-160IOE General GuideComputer for transfer of system data and file data. Use Connecting the AC Adaptor and Connecting to Computer Next, plug the AC adaptor into a power outletPage Configuring DIP Switch Settings Using Wall Mount Unit To remove the Bridge Satellite Cradle from the wall Connecting Multiple Bridge Satellite Cradles DT-160IOE Use the modular cable for the connectionsBridge Satellite Cradle DT-160IOE Specifications IR CommunicationUsing the Cradle-type Battery Charger AC Adaptor Jack Connect the AC adaptor here Wall Mount Unit Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger DT-169CHGE Specifications Using the Dual Battery Charger Charger Other Connection Port Charging a Battery Pack Charge Indicator LampConnecting Multiple Dual Battery Chargers Dual Battery Charger DT-5022CHG Specifications Using PC Card DT-X11M30E / M30U / M10E Affixing a PC Card RemoverTo load a PC card Page Using CF Card Extension Unit Attaching the CF Card Extension UnitCF Card Extension Unit DT-894CFU Specifications Loading a CF CardUsing Rechargeable Battery Pack Battery Pack SpecificationsLarge-capacity Battery Pack Specifications
Related manuals
Manual 51 pages 5.13 Kb

DT-X11 Series specifications

The Casio DT-X11 Series represents a remarkable line of handheld terminals designed to meet the needs of various industries, including retail, logistics, and manufacturing. Known for their robust performance and user-friendly interface, these devices have become a favorite among businesses seeking to enhance their operational efficiency.

One of the standout features of the DT-X11 series is its exceptional durability. Built to withstand the rigors of demanding work environments, these terminals are compliant with IP54 standards, making them resistant to dust and water splashes. Additionally, they can endure drops from a height of up to 1.5 meters, ensuring reliability in tough conditions.

The DT-X11 series is powered by a high-performance processor, which facilitates fast data processing and seamless multitasking. This efficiency is complemented by a generous memory capacity, allowing users to run complex applications and store large amounts of data without experiencing slowdowns.

Another key characteristic is the device's display. The DT-X11 series features a high-resolution, daylight-readable screen that ensures clear visibility even in bright conditions. This capability is vital for field operations, where workers must read labels, scan barcodes, or access information outdoors.

Connectivity is a strong suit of the Casio DT-X11 series. Equipped with advanced wireless technologies including Wi-Fi and Bluetooth, these terminals enable real-time data transfer. This connectivity enhances communication between team members and systems, promoting streamlined operations and improved decision-making.

The DT-X11 series also excels in scanning capabilities. With an integrated high-performance imager, it can read various barcode types quickly and accurately. This reliability is essential for inventory management, point-of-sale transactions, and logistics applications, where timely and precise data capture is crucial.

In terms of ergonomics, the design of the DT-X11 series considers the user experience. Its lightweight build and comfortable grip reduce user fatigue during prolonged usage. The touchscreen interface, combined with physical buttons, provides versatility in input methods, catering to different user preferences and environments.

Battery life is another highlight, as the DT-X11 series is equipped with a long-lasting battery that supports extended operations without frequent recharging. Users can confidently engage in full-day tasks without the worry of losing power mid-operation.

In summary, the Casio DT-X11 Series offers a potent combination of durability, performance, connectivity, and user-friendliness. These handheld terminals are designed to empower businesses with the tools they need to improve efficiency and accuracy in their operations, making them an excellent investment for industries that rely on mobile data capture.
Top Page Image Contents