Casio DT-X11 Series manual

11	IR Port	This port is used for IR communication with another Handheld
		Terminal or the Bridge Satellite Cradle.
12	Power Contacts	Contact point for supplying power from the Bridge Satellite
		Cradle and Cradle-type Battery Charger.
13	CLR Key	Press to clear all key inputs.
14	Fn Key	Press this key and then a function key or number key to
		configure settings or to run previously registered applications.
15	PC Card Slot	For insertion of a separately available PC card.
16	USB Port	For connection to a computer or other device using a USB cable.
17	Headset Jack	For connection of a commercially available headset (∅2.5mm).
18	Battery Pack	Slide these switches to lock and release the battery pack cover.
	Cover Lock
	Switches
19	R Trigger Key	Press to perform a code read operation. This is also pressed to
		perform a full reset.
20	L Trigger Key	Press to perform a code read operation.This is also pressed to
		cancel a full reset.
21	Wrist Strap Hole	Connect the wrist strap here.
22	C-MOS Imager	Reads bar codes and 2-dimensional codes.
	(C-MOS Imager
	models only)
	Reader Port	Reads bar codes.
	(Laser Scanner
	models only)
23	Reset Switch	Press to reset the Handheld Terminal.
24	CF Card Slot Unit	For connection of a separately available CF Card Extension
	Terminal	Unit.
25	Battery Pack	Covers the compartment that holds the battery pack.
	Cover

E-20