Sony SA-VA10 manual Glossary, Index, J, K, L, M, Y, Z

Additional Information

Rear speaker connecting cord, 10 m

(2)

Audio connecting cord, 1.5 m (1)

Remote Commander RM-J10 (1)

Sony batteries SUM-3 (NS) (2)

Anti-vibration pads (8)

Design and specifications are subject to change without notice.

Glossary

Center mode

Speaker setting to enhance the Dolby Pro Logic Surround mode. Select one of the following four center modes according to your speaker system.

•NORMAL mode

Select NORMAL mode if you connect a small sized active center speaker to this speaker system. Since a small speaker cannot produce enough bass, the bass sound of the center channel is output from the front speakers.

Front		Small	Front
speaker (L)	center speaker		speaker (R)

Rear	Rear
speaker (L)	speaker (R)

The test tone is output as shown on page 11.

• WIDE mode

Select WIDE mode if you connect an active

center speaker equivalent to the two front

without using rear speakers.
	Center
Front	speaker	Front
speaker (L)		speaker (R)

The test tone is output:

/Front (L) /Center /Front (R)

•PHANTOM mode

Select PHANTOM mode if you do not want to use the center speaker to output sound. The sound of the center channel is output from the front speakers.

Front	Front
speaker (L)	speaker (R)

Rear	Rear
speaker (L)	speaker (R)

The test tone is output:

/Front (L) + (R) /Rear

Delay time

Time lag between the surround sound output from front speakers and rear speakers. By adjusting the delay time of the rear speakers, you can obtain the feeling of presence. Make the delay time longer when you have placed the rear speakers in a small room or close to your listening position, and make it shorter when you have placed them in a large room or apart from your listening position.

Index

A, B

Adjusting bass 12 delay time 12 speaker volume 11

super woofer level 11, 12 treble 12

volume 11

Audio component hookups 9

C

Center mode 13, 15 NORMAL mode 13, 15 PHANTOM mode 13, 15 3 CH LOGIC mode 13, 15 WIDE mode 13, 15

Connecting. See Hookups

D

Delay time 12, 13, 15

Dolby Pro Logic Surround 10, 15

center mode 13, 15 Dolby Surround sound 15

E, F, G

External center speaker 13

H, I, J, K, L, M

Hookups

AC power cord 9 audio components 9 speakers 8 TV/VCRs 9

N, O

NORMAL mode 13, 15

P, Q

PHANTOM mode 13, 15

speakers. With the WIDE mode, you can

take full advantage of Dolby Surround

sound.	Center
		Front
Front	speaker
speaker (L)		speaker (R)

Rear	Rear
speaker (L)	speaker (R)

The test tone is output as shown on page 11.

• 3 CH LOGIC mode

Select 3 CH LOGIC mode if you don't want to use the rear speakers to output sound. The sound of the rear channel is output from the front speakers to let you experience some of the surround sound

Dolby Pro Logic Surround

Decoding system of Dolby Surround sound standardized in TV programs and movies. Compared with the former Dolby Surround system, Dolby Pro Logic Surround improves sound image by using four separate channels: off-screen audio effects, on-screen dialog, left-to-right panning, and music. These channels manipulate the sound to be heard and enhance the action as it happens on the screen. To take advantage of Dolby Pro Logic, you should have at least one pair of rear speakers and/or one center speaker. You also need to select the appropriate center mode to enjoy a full effect.

Dolby Surround

Encoding and decoding system of Dolby Surround sound for consumer use. Dolby Surround decodes the extra channels on the Dolby Surround-encoded sound tracks of movie videos and TV programs and produces sound effects and echoes that make the action seem to envelop you.

R

Remote 6, 10, 11, 12

S

Speakers connection 8 placement 7

Speaker volume 11 Surround sound 10, 11, 12

T

Test tone 11

3 CH LOGIC mode 13, 15 Troubleshooting 14 TV/VCR hookups 9

U, V

Unpacking 6

W, X, Y, Z

WIDE mode 13, 15

15