Sony DHC-MD5 RecordingonanMD manually, Before you start recording, Press ¸ of the MD deck

Before you start recording (continued)

•This unit’s tuner and other analog components

(e.g., a tape deck)

–The analog signal is converted to digital and recorded (analog recording).

–A track number is marked at the beginning of a recording, but when you turn on the Level Sync function (see page 26), track numbers are automatically marked in sync with the level of the input signal.

*For details on limitations of digital recording, see page 42.

**This signal conversion happens because this unit does not have a digital input.

Note on the track number of an MD

On an MD, the track number (track sequence), track start and end point information, etc., are recorded in the TOC* area independent of the sound information. You can edit recorded tracks quickly by modifying the TOC information.

* TOC: Table Of Contents.

RecordingonanMD manually

The system automatically locates the last recorded portion and starts recording from that point.

4 ¹ 3

		¼	â
á	¸	¹	¤	¨
á	¸	¹	¤
2	1

1 Insert a recordable MD.

2 Press FUNCTION and select the source (e.g., CD) you want to record.

3 Press r REC.

The deck is now ready for recording. To mark track numbers, see “Marking track numbers” next. When recording from this unit’s CD, the track numbers are automatically marked.

4 Press ¸ of the MD deck.

Recording starts.

5 Start playing the source to be recorded.

24

DHCMD5 3-858-047-12.EN (1)