Ricoh 337943-003 manual System Parameters

System Parameters

System parameters, in many cases, permanently alter the overall configuration of a product. They are set using the operator setsystemparams and read using the operator currentsystemparams. In general, setting system parameters requires a password. System parameters are not subject to save and restore. Their values persist across jobs. Listed below are the system parameters present in the printer.

System Parameters

Key	Type	Default	For More Information
BuildTime*
	integer	Time dependent	See Section 3.2 of the Supplement.
ByteOrder*
	boolean	false	See Section 3.2 of the Reference Manual.
CurDisplayList**
	integer	0	See Section 3.2 of the Reference Manual.
CurFontCache**
	integer	0	See Section 3.2 of the Reference Manual.
CurFormCache**
	integer	0	See Section 3.2 of the Reference Manual.
CurInputDevice**
	string	( )	See Section 3.2 of the Supplement.
CurOutlineCache**
	integer	0	See Section 3.2 of the Reference Manual.
CurOutputDevice**
	string	( )	See Section 3.2 of the Supplement.
CurPatternCache**
	integer	0	See Section 3.2 of the Reference Manual.
CurScreenStorage**
	integer	0	See Section 3.2 of the Reference Manual.
CurSourceList**
	integer	0	See Section 3.2 of the Supplement.
CurUPathCache**
	integer	0	See Section 3.2 of the Reference Manual.
DoPrintErrors§
	boolean	true	See Section 3.2 of the Supplement.
DoStartPage
	boolean	false	See Section 3.2 of the Supplement.
FactoryDefaults§
	boolean	false	See Section 3.2 of the Supplement.
FatalErrorAddress§
	integer	0	See Section 3.2 of the Supplement.
FontResourceDir
	string	(fonts/)	See Section 3.2 of the Supplement.

PostScript Languange Printer Commands 1-11