Ricoh 337943-003 manual Device Parameters of Type /FileSystem, Parameters for Disk

Device Parameters of Type /FileSystem

File system access from PostScript programs is described in Sections 3.8.2 and 3.8.3 of the Reference Manual and Section 3.3 of the Supplement.

Parameters for Disk

The factory default values for the %disk% device parameters are shown below.

%disk% Device Parameters

Key	Type	Default	For More Information
BlockSize *
	integer	1024	See Section 3.3 of the Supplement.
Bus*
	name	%scsi%	See Section 3.3 of the Supplement.
Free** §
	integer	disk-dependent	See Section 3.3 of the Supplement.
HasNames*
	boolean	true	See Section 3.3 of the Supplement.
InitializeAction
	integer	0	See Section 3.3 of the Supplement.
Interleave*
	integer	5	See Section 3.3 of the Supplement.
LogicalSize§ **
	integer	disk-dependent	See Section 3.3 of the Supplement.
Mounted
	boolean	true	See Section 3.3 of the Supplement.
PhysicalSize** §
	integer	disk-dependent	See Section 3.3 of the Supplement.
PrepareAction
	integer	0	See Section 3.3 of the Supplement.
Removable*
	boolean	false	See Section 3.3 of the Supplement.
Searchable
	boolean	true	See Section 3.3 of the Supplement.
SearchOrder
	integer	0	See Section 3.3 of the Supplement.
Type*
	name	/FileSystem	See Section 3.3 of the Supplement.
Writable
	boolean	true	See Section 3.3 of the Supplement.
§ Value is derived from the disk media.
* Value is a read-only constant.
** Value is read-only but changes.
Device %disk0% is on the %scsi% bus.

PostScript Languange Printer Commands 1-15