Samsung 2043NWX quick start Connections, Connecting Cables

Page 7

Connections

Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.

Use a connection appropriate for your computer.

Using the D-sub (Analog) connector on the video card.

•Connect the signal cable to the 15-pin, D-sub port on the back of your monitor.

Connected to a Macintosh.

•Connect the monitor to the Macintosh computer using the D-sub connection cable.

Note

If the monitor and the computer are connected, you can turn them on and use them.

Image 7

Contents LCD Monitor Introduction Package ContentsUnpacking Others Your Monitor Initial SettingsMenu button Menu FrontRear Power IndicatorCable holding ring Connections Connecting CablesHas Stand Using the Stand Monitor AssemblyAttaching a Base Page Useful Tips TroubleshootingSelf-Test Feature Check EnvironmentNo images on the screen. I cannot turn on the monitor Check ListScreen suddenly has become unbalanced Screen is out of focus or OSD cannot be adjustedCannot see the On Screen Display Screen shows strange colors or just black and whiteMagicTune doesnt work properly Check when MagicTune does not function properly

Related manuals

Manual 69 pages 62.67 Kb