Samsung SP-M275, SP-M255, SP-M20, SP-M225, SP-M305 High. The projector is turned off automati

ICONS	STATUS	STATE	ACTION
	Warning	The air filter has reached the end of its life.	The air filter needs to be replaced.
	Warning	The air filter has been blocked by dust.	The air filter needs to be cleaned.
	Error	The air filter has been blocked by dust.	The air filter needs to be cleaned.

Temperature Level Status Icons

ICONS	STATUS	STATE	ACTION
	Temperature status	The projector's internal temperature is	None. It's normal.
		normal.(standby mode)
	Temperature status	The projector's internal temperature is	None. It's normal.
		normal.(low)
	Temperature status	The projector's internal temperature is	None. It's normal.
		normal.(medium)
	Temperature status	The projector's internal temperature is	None. It's normal.
		normal.(little bit high)
	Temperature status	The projector's internal temperature is	Refer to Action 3 in Clearing Indi-
		higher than the limit.	cator Problems.
		The projector's internal temperature is too	Refer to Action 4 in Clearing Indi-
	Temperature status	high. The projector is turned off automati-
			cator Problems.
		cally.

•Managing the Projectors

: Using the icons in the <Projector List> (only applicable to 'V'-marked projectors in the monitoring window)

(Refresh): Updates the status of the projector.

(Power On): Turns on the power of the projector.

(Power Off): Turns off the power of the projector.

3-6 Using