Samsung BP59-00140E-01, SP-M220S, SP-M200S, SP-M250S specifications Option

3-5-4. Option

MENU		DESCRIPTION
Language	Using this function, you can select the language used for the menu screen.
Menu Option	• <Position> : You can move Menu Position up/down/left/right.
	• <Transparency> : You can set the translucency of the menu.
		• <High>-<Medium>-<Low>-<Opaque>
	• <Display Time> : You can set the display time of the menu.
		• <5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-<Stay On>
Sound	The projector comes with an internal 7W (mono) speaker. Use the equalizer settings below to adjust
	the sound.
	• <100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Filter Check Time	Sets the check period for the filter. (Unit: hours)
	•	<Off>-<100>-<200>-<400>-<800>
		If the filter usage time is larger than the filter check period, the filter check message is
		displayed for 1 minute whenever the projector is turned on.
		Filter check message: "<Check the filter, and if necessary, clean or replace it.>".
Auto Power On	With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
	ing the Power button.
	•	<Off>-<On>
Sleep Timer	With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
	cally.
	(There must be no button input from the remote control or the top of the projector for the specified
	time)
	• <Off>-<10 min>-<20 min>-<30 min>
Security	To deter theft, you can set a password that users must enter when the projector powers on. When
	you set a password, the projector will not work without it.
	•	<Power On Protection>
		• <Off> : Enter your current password and set the protection function to off.
		• <On> : Enter a new password and set the protection function to on.
	• <Change Password> : Change your current password.
		Use the displayed number keys to enter or change the password.
Panel Lock	You can disable the buttons on the projector body so that the projector can only be operated by the
	remote control.
	•	<Off> - <On>
Information	You can check external source signals, picture setup, and PC picture adjustment.

Using 3-5