shaking. If the noise is not removed using Fine Adjustment, adjust the frequency to the maximum and then perform Fine Adjustment again.
Only activated in the PC environment.
1)Auto Adjustment : Used to adjust frequency and phase of PC screen automatically.
2)Coarse : Used to adjust frequency when vertical lines appear on PC screen.
3)Fine : Used to fine tune the PC screen.
4)Zoom : Used to extend PC screen from the center.
5)Reset : Using this function, you can reset the PC menu settings to the factory default settings.
▶Video Type
If the Component video signal input through the
※ For the
Factory Default Using this function, you can reset various settings to the factory default settings.
Auto
Adjustment
Coarse
Fine
Zoom
Reset
Input Picture Setup Option
* Click the Play(
)/Stop(
) button in the table below to view the video file.
Screen
DescriptionPlay/Stop
Adjustment
Language | You can select the language used for the menu screen. |