Samsung SP-U300M, BP59-00136C-02 manual Installing the Projector, Leveling with Adjustable Feet

2-2-1 Installing the Projector

Install the projector so that the beam from the projector is perpendicular to the screen.

•Place the projector so that the lens is at the center of the screen. If the screen is not vertically installed, the picture on the screen may not be a rectangle.

•Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displayed clearly.

•When installing the screen in bright surroundings, use curtains.

•You can install the projector in the following locations: Front-Floor / Front-Ceiling / Rear-Floor / Rear-Ceiling.(To view the installation position settings)

To view the picture when installing the projector behind the screen

Install a semi-transparent screen.

1.Select Menu > Setup > Install > Rear-Floor

2.Select Menu > Setup > Install > Rear-Ceiling

To view the picture when installing the projector in the front of the screen

Install the projector at the side where you are watching the screen.

1.Select Menu > Setup > Install > Front-Floor

2.Select Menu > Setup > Install > Front-Ceiling

2-2-2 Leveling with Adjustable Feet

For level placement of the projector, adjust the Adjustable Feet of the projector.

You may adjust the level of the projector up to 3 degrees.

Depending on the position of the projector, Keystone distortion of the image may appear.

Installation and Connection 2-2-1