2-5 Connecting an A/V device with an audio/video cable
1.Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of the video equipment using a video cable.
Connect the
2.When the connections are all completed, connect both power cords of the projector and the DVD, VCR, or camcorder.
Using the Projector
1.Turn on the projector, press the [SOURCE] button to select the external device (DVD, VCR or camcorder) that is connected.
2.If the corresponding mode is not selected, check whether the video cable is connected correctly.
• Check that the projector and the video equipment are turned off before connecting cables.
•The <Video> mode brightness is lower than <PC> and <MEDIA PLAY> mode.
2-6 Connecting an A/V device with a Component/D-Sub Cable
1.Connect [PC IN] input port on the rear of the projector to the COMPONENT port of AV equipment using a
2.Connect audio cable(Not supplied) to the audio input port on the rear of the projector.
Installation and Connection |