Boston Acoustics VOYAGERPRO user manual Encoding Immediately after Packing

Page 14

DTS Pro Series Surround Encoder – Installation and User Manual

4. Encoding Immediately after Packing

Since we chose “Pack and Encode” in our example, the Pro Surround Encoder program starts automatically when the Packer is finished (Figure 3) and runs in a separate window on the desktop.

Figure 3. DTS Pro Series Surrounf Encoder Screen

1.Almost all the settings on this page are carried over from the Packer program.

By default, Use source file directory and Use source file name are checked (as in this example), so the Encoder will use the same filename and directory of the packed (.agm) file.

Otherwise, uncheck these options, type a filename, and navigate to a directory for the encoded file.

2.If Encode whole source file is checked, the time fields are read-only. If unchecked, both the Output start time and Output end time are editable. Use output start and end times if you want to encode a portion (not all) of the source file. For example, this is where you would trim the pre-roll and post-roll of the project.

The Frame rate cannot be edited (it is read-only).

12

Image 14
Contents Surround encoder Page Contents Installation Surround Encoder requirements Displaying System information Already been packed Overview Using the Pro Packer Pro Packer Initial screen1Parent = the next higher directory Page Repeat for the other channels DTS 5.1ES Encoding Immediately after Packing DTS Pro Series Surrounf Encoder ScreenBit Rate and Output type Using the Encoder in Standalone Mode Page Page Page Encrypting a File Encryption Utility screenUtility will decrypt the file Uninstalling the Software DVD Authoring for DTSDialog Normalization Page Page Page Page Surround encoder