DTS Pro Series Surround Encoder – Installation and User Manual
1.Installation
1.1PC Standalone Installation
System requirements
■PC computer, Pentium 4, 1GHz or higher (recommended)
■256 MB RAM
■1 hard drive, 7200 RPM minimum, 200 MB free disk space
■Greater than 20 GB disk space for audio files
■USB port for the license adapter key (dongle)
■Windows XP Home edition or XP Professional (SP1)
Surround Encoder installation procedure
The installation of the Surround Encoder software onto a PC computer is a simple process.
Three software components will be installed
■An update to Java virtual machine (if needed)
■Runtime for the adapter key dongle (WIBU, a third party)
■DTS Pro Series Surround Encoder software, which includes the Pro Packer, Pro Encoder, and Pro Encrypter utility and libraries
Important: Proper privileges are required to install and uninstall Surround Encoder software, including the WIBU driver for the
Instructions
!Caution: Do not install the adapter key (dongle) before the software has been installed. Install the adapter key into a USB port on your system after the software has completed installation.
1.Insert the
The Installation process should start automatically. If it does not automatically start, then from the Start menu, select Run and Browse to the proper setup.exe on the
2.Proceed through the series of prompts. Accept all default settings. Restart your computer when prompted to do so.
When installation is complete, a set of three icons will appear on your PC desktop.
2