Samsung SCX-4100 manual Clearing LCD Error Messages, Display Meaning Suggested solutions

Page 139

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to indicate the machine’s status or errors. Refer to the following table to understand the message’s meaning and correct the problem, if necessary. Messages and their meanings are listed in alphabetical order.

Display

Meaning

Suggested solutions

 

 

 

Door Open

The front or rear cover is not

Close the cover until it locks

securely latched.

into place.

 

 

 

 

[JAM 1] or

The toner cartrige is not

Install the toner cartridge. See

[No Cartridge]

installed.

page 1.6.

 

 

 

Low Heat Error

There is a problem in the

Unplug the power cord and

Open Heat Error

fuser unit.

plug it back in. If the problem

 

 

persists, please call for

[Over Heat]

 

 

service.

 

 

 

 

A problem has occurred in

Unplug the power cord and

[LSU Error]

the LSU (Laser Scanning

plug it back in. If the problem

Unit).

persists, please call for

 

 

 

service.

 

 

 

No Paper

The paper tray has run out

Load paper in the paper tray.

[Add Paper]

of paper.

See page 1.8.

 

 

 

Paper Jam 0

Paper has jammed in the

Clear the jam. See page 8.2.

feeding area of the paper

 

Open/Close Door

 

tray.

 

 

 

 

 

 

 

• Paper has jammed in the

• Clear the jam. See page 8.5.

 

fuser area.

 

Paper Jam 1

• A paper jam has occurred

• Clear the jam. See page 8.6

in the manual feeder or

 

Open/Close Door

 

the machine detects non-

 

 

 

 

feeding from the manual

 

 

feeder.

 

 

 

 

Paper Jam 2

Paper has jammed in the

Clear the jam. See page 8.3.

Check Inside

paper exit area.

 

 

 

 

8.8TROUBLESHOOTING

Page 138 Page 140
Image 139
Page 138 Page 140
Contents Page About the User’s Guides Contact Samsung World Wide Hungary Contents Printing Using Your Printer in Linux Troubleshooting Important Precautions and Safety Information Page Ozone Safety Laser Safety StatementPage Canadian Radio Interference Regulations Radio Frequency EmissionsFCC Information to the User Approvals and Certifications Declaration of Conformity European CountriesEC Certification Replacing the Fitted Plug for UK Only Page Differences Between British and American English Getting Started Unpacking Quick Install GuideStarter Toner Cartridge Clearance Space Selecting a LocationThese are the main components of your machine Understanding the Component LocationFront View Rear ViewControl Panel Functions Installing the Toner Cartridge Getting Started Loading Paper Changing the Paper Size in the Paper Tray Getting Started See your computer User’s Guide if you need help Using a Parallel Cable Windows onlyUsing a USB Cable Making ConnectionsTo the USB port on your computer Turning the Machine On Linux Driver Remote Control PanelAbout Samsung Software Windows GDI DriverFeature Printer Driver Printer Driver FeaturesFit to page printing Scale printing Watermark Overlay System Requirements Installing Samsung Software in WindowsInstalling Samsung Software Getting Started Getting Started Click Install SmarThru Installing Samsung SmarThruCopy components to produce professional quality copies Software installation supports two types of setupWhen the installation is finished, click Finish Repairing SoftwareRemoving Software Uninstalling the MFP DriverUninstalling Samsung SmarThru Changing the Display Language Setting Up the Machine SystemSetting the Paper Size and Type Toner Save Mode Using the Save ModesPower Save Mode Memo Paper Handling Plain paper Selecting Print MaterialsType, Input Sources and Capacities Paper Type Input Source/Capacity Paper TrayAttempting to print on damp, curled, wrinkled, or torn paper Guidelines for Paper and Special MaterialsSelecting an Output Location Printing to the Front Output Tray Face down Be careful not to pinch your fingers Printing to the Rear Output Slot Face upTransparencies Paper Handling Loading Paper in the Paper Tray Sizes that are not currently loaded in the paper tray Using the Manual FeederPaper Handling Setting the Paper Type and Size for Manual Feeder Memo Printing Printing a Document in Windows LandscapePortrait Select the Samsung SCX-4100 Series printer Double-click the Samsung SCX-4100 Series icon Canceling a Print JobFor each job To stop a print job from the Printers folderUsing Help Using a Favorite SettingLoaded in the tray Setting Paper PropertiesProperty Description Copies SizeSelect Color Paper Setting Graphic PropertiesProperty Description Source TypeAdvanced To print a documentToner Save QualityProperty Description Advanced True Type Options Download as Bit Image When thisWhen the Print All Text Black option is Printing Multiple Pages on One Sheet of the PaperPreview image You can scale your print job on a Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size Printing Posters Using an Existing Watermark Using WatermarksClick Ok and start printing Creating a Watermark Deleting a Watermark Editing a WatermarkClick the Extras tab and click Edit in the Overlay section Using OverlaysWhat is an Overlay? Creating a New Page OverlayEdit Overlays window, click Create Overlay Using a Page Overlay Click Delete Overlay Deleting a Page OverlaySetting Up the Host Computer Setting Up the Locally Shared PrinterWindows 9x/Me Windows NT 4.0/2000/XP Setting Up the Client ComputerSelect Local Port and click New Port Copying Preparing a Document Loading Paper for CopyingMaking a Copy Copying Press No. of Copies Setting Copy OptionsDarkness Number of CopiesReduced/Enlarged Copying Original Type Clone Copying Using Special Copy FeaturesAuto Fit Copying Sided in 1 page Copying Up Copying Poster Copying Changing the Default Settings Setting the Time Out Option Scanning Scanning Basics Scanning Using Samsung SmarThruScan To SmarThru 4 window opensApplication ImageCopy PrintTo use on-line help file SettingWeb Scanning Process with TWAIN- enabled Software Using Your Printer Linux Getting Started Software Installing the MFP DriverSupported OS Recommended Hardware RequirementsClick Install When the welcome screen appears, click Next Installing the MFP DriverWhen the installation is completed, click Finish Click Next Click Finish Click UninstallOpening the MFP Configurator Using the MFP ConfiguratorDouble-click MFP Configurator on the desktop Printers Tab Printers ConfigurationClasses Tab Scanners ConfigurationClasses tab shows the list of the available printer classes Sharing Ports Between Printers and Scanners MFP Ports ConfigurationConfiguring Printer Properties Printing from Applications Printing a DocumentChange the printer and print job properties Printing Files Device using the standard Cups way directly fromClick Properties Scanning a DocumentDrag the pointer to set the image area to be scanned Using Your Printer in Linux Using Preset Job Type Settings You can use the following tools to edit the image Using the Image EditorTools Function Allows you to flip the image vertically or Size manually, or set the rate to scaleProportionally, vertically or horizontally Number of degrees from the drop-down listMemo Maintenance System data list prints out Printing the System Data ListClearing the Memory Press Start/EnterCleaning the Outside Cleaning Your MachineCleaning the Inside Maintenance Cleaning the Document Glass Expected Cartridge Life Maintaining the Toner CartridgeToner Cartridge Storage Saving TonerRedistributing Toner Reinstall the cartridge and close the front coverOpen the front cover Replacing the Toner Cartridge Cleaning the Drum Consumables and Replacement PartsItems Select Samsung SCX-4100 Series and then Remote Control Panel Using the Remote Control PanelTroubleshooting Paper Tray Clearing Paper JamsMessage Location of Jam Go to Paper Exit Area Troubleshooting Fuser Area or Around the Toner Cartridge Tips for Avoiding Paper Jams Select 90 degrees Click Display Meaning Suggested solutions Clearing LCD Error MessagesPaper Feeding Problems Solving ProblemsCondition Suggested solutions Condition Possible cause Suggested solutions Printing ProblemsSelect Samsung SCX-4100 Series as Windows 9x/Me, PPM for A4-sized paper If you are usingMachine Paper source Selects printAdvanced Options window Select Download as Bit ImageToner specks Printing Quality ProblemsDropouts See Replacing the Toner Cartridge on Clean the LSU Clean the LSU. SeeClean the inside of the machine. See If black vertical streaks appear onCurl or wave ScatterCharacters SkewCartridge and reinsert Machine may require repair. Contact a serviceAre dirty Black pagesCurl Copying Problems Scanning Problems Problem Possible Cause and Solution Common Linux ProblemsList To identify the source of the problem, you should openIs not functioning properly Again, you may make the necessary symbolic link Installed both LinuxPlease install the LPP first If you want to uninstall only one of them, pleasePaper Specifications General SpecificationsScanner and Copier Specifications Printer SpecificationsCharacters x 2 lines General SpecificationsPackage Weight Paper 1.8 Kg Plastic 0.5 Kg ~ 163 g/m2, 16 ~ 43 lbScanner and Copier Specifications Max x 356 mm 8.5 x 14 Printer SpecificationsEnvelope C6, Envelope Monarch, Envelope B5 Min x 127 mm 3 x 5Overview Paper SpecificationsSupported Sizes of Paper Size mm/in Weight CapacityProof wrapping Guidelines for Using PaperTry another kind of paper Smooth, or embossedPaper Output Capacity Paper SpecificationsSecond Paper Storage Environment Envelopes with Double Side Seams EnvelopesType of Address Minimum Maximum Envelopes with Adhesive Strips or FlapsEnvelope Margins Envelope StorageTransparencies LabelsIndex Printer properties Linux 6.12 windows Remote Control Panel 1.23 SmarThru Uninstalling MFP driverMode, change Watermarks, use Visit us at
Related manuals
Manual 111 pages 56.17 Kb Manual 167 pages 32.6 Kb
Top Page Image Contents