SRP-275
5. Roll Paper Installation
1) To prevent data loss, make sure that the printer is not receiving data.
2) Open the rear cover by pushing the open button.
3) Remove the used paper roll core if there is one.
4) Insert the paper roll as shown.
5) Be sure to note the correct direction that the paper should come off the paper roll.
6) Pull out small amount of paper as shown. Then close the cover and tear off the extra paper by pulling it toward the front of the printer.
CAUTION
Do not touch the auto cutter blade when you open rear cover.
Rev. 1.04 | - 29 - |