TAB 8 | TAB 7 | TAB 6 | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
OPERATING YOUR CONNECTED DEVICES
Watching TV
Your TV may be receiving its program content through a set top box or the tuner built into your TV.
Note: Since most TVs come with an IR (infrared) remote, you may need to point the Bose® remote at your TV to operate it.
Using a set top box
If you connected a cable, satellite, or other set top box to your TV, it will appear in the SOURCE menu under the name you assigned it during the setup process.
1.Press the remote SOURCE button and select the device that provides your TV programs.
2.Tune to a station. See “Tuning to a TV station.”
Using the tuner in your TV
If you are using the tuner in your TV to receive TV programs:
1.Press the remote SOURCE button and select TV.
2.Press the TV Input button to select the internal tuner in your TV.
3.Tune to a station. See “Tuning to a TV station.”
To return to using other sources, use the TV Input button to first select the input for the Bose system, then press the SOURCE button and select another source.
Tuning to a TV station
You can tune to a TV station using any of the following methods.
Enter the channel number on the keypad and press OK. Use the dash button for channel numbers using a dash or period.
Press Channel Up (
) or
Down (
) to change channels.
Press 
to tune to last selected channel.
Press GUIDE. Use the navigation, page up/down, and OK buttons to select a station from the program guide.
8