TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
INSTALLATION
Making antenna connections
The supplied AM and FM antennas connect to the rear panel of the media center (Figure 10).
Note: The FM connector may be used with an outdoor antenna. Before doing this, consult a qualified installer. Follow all safety instructions supplied with the antenna.
Figure 10 Connections for the AM and FM antennas
FM | AM base |
AM
FM antenna connection
1.Plug the connector on the FM dipole antenna lead into the FM antenna jack.
2.Spread out the antenna arms and change their orientation as needed to get the best FM reception.
3.Keep the antenna as far as possible from the media center, display, and Acoustimass® module.
AM antenna connection
1.Plug the connector on the AM loop antenna lead into the AM antenna jack.
2.Stand the AM antenna on the base or mount the antenna on a wall, following the instructions enclosed with the AM antenna.
3.Keep the antenna as far as possible (at least 20 inches or 50 centimeters) from the media center and display module, and at least 2 feet (60 centimeters) from the Acoustimass module.
Note: AM reception can be adversely affected by a nearby television when it is on. Turn off the TV for best AM reception.
Cable radio as an option
Some cable TV providers make FM radio signals available through the cable service to your home. This cable connects to the FM antenna jack on the back panel of the media center.
For instructions on how to make this connection, contact your cable TV provider.
14