TAB | TAB | TAB 6Italiano | TAB 5 | TAB 4 | TAB 3 | TAB 2 |
English
OPERATION
Watching TV
Your Lifestyle® system works with many different types of TVs, from standard definition to Digital High- Definition TV (HDTV). This section shows you how to set up your Lifestyle® system remote control to work with your particular brand of TV, then configure the sensor so your TV automatically turns on when you press the On/Off button on the remote.
Setting up the Lifestyle® remote to control the TV
Before you can control the TV, you must first select the correct TV code by following the steps below.
1.Turn on the TV.
2.On the Lifestyle® remote, press TV. (See “The remote control” on page 23 for information on operating the remote.)
3.To display the Lifestyle® system menu on the TV, press System.
The message “SYSTEM: SEE TV” should appear on the Lifestyle® system display module.
4.To select the Setup tab, move right and select 
, then press ENTER.
5.Move down to TV Brand and press ENTER.
6.Select the brand of your TV from the list and press
ENTER.
7.Move down to TV Code and press ENTER.
8.Select the first TV code in the list.
9.Press the (TV) On/Off button (located under the TV button).
•If the TV turns off, you have chosen the correct code.
•If the TV does not turn off, select the next code and press (TV) On/Off again.
Continue selecting codes until you find one that works.
10.When you have a working code, enter it below, then press ENTER.
TV Code: ____________________
Use the remote supplied with the TV to select the video input that allows you to see the Lifestyle® system menu.
11. To exit the system menu, press Exit.
30