Samsung M8-DVR manual Defect Management, Automatic Defect Allocation, Smart, 6 APM

Page 40

5.5.3Defect Management

The Spinpoint M8 hard disk drive media is scanned for defects. After defect scanning, the defective sectors are saved in the defect list. A defect encountered in the manufacturing process is slipped to the next physical sector location. All logical sector numbers are pushed down to maintain a sequential order of data. The read/write operation can “slip” over the defective sectors so that the only performance impact is idle time.

5.5.4Automatic Defect Allocation

The automatic defect allocation feature automatically maps out defective sectors encountered during read sector or write sector operations. These types of defective sectors are typically caused by grown defects. During write operations, if write errors are encountered, all sectors within the target servo frame are mapped out. Original data is transferred and written into designated reserved sector areas determined by the HDD firmware.

5.5.5SMART

The intent of Self-monitoring, Analysis and Reporting Technology (SMART) is to protect user data and to minimize the likelihood of unscheduled system downtime that may be caused by unpredictable degradation and/or device fault. By monitoring and storing critical performance and calibration parameters, SMART devices attempt to predict the likelihood of near-term degradation or fault condition. Providing the host system knowledge of a negative reliability condition allows the host system to warn the user of the impending risk of a data loss and advise the user of appropriate action.

5.5.6APM

The Automatic Power Management (APM) feature set is an optional feature set that allows the host to select a power management level. The power management level is specified using a scale from the lowest power consumption setting to the maximum performance level. Device performance may increase with increasing power management levels. Device power consumption may increase with increasing power management levels. This feature is enabled by the Set Features command.

Spinpoint M8-DVR Disti Product Manual REV 2.0

34

Page 39 Page 41
Image 40
Page 39 Page 41
Contents M8-DVR Product Manual Page Table of Contents Smart APM Read Fpdma Queued 60h Read Log Extended 2Fh Read Long 22h Table of Tables User Definition ScopeManual Organization Sata ReferenceDescription IntroductionKey Features Standards and Regulations Hardware RequirementsSpecifications Specification SummaryPhysical Specifications Logical ConfigurationsPhysical Specifications Physical dimensionsPerformance Specifications Power consumption Power consumptionPower Requirements RatedEnvironmental Specifications Environmental SpecificationsLinear Shock 1/2 sine pulse Rotational Shock1Measurement Position Reliability Specifications Annualized Failure Rate AFRInstallation Space RequirementsUnpacking Instructions MountingMounting Dimensions OrientationVentilation Cable ConnectorsSata Connectivity Computer mainboard Serial ATA Power ManagementSATA-Bus Interface Connector HDD Power, Sata Interface, and Factory Jumper ConnectorPin Locations on the Drive Pcba Drive Installation DC Power Connector and SATA-Bus Interface Cable ConnectionsHead / Disk Assembly HDA Base Casting AssemblyDC Spindle Motor Assembly Disk Drive OperationCoverAssembly Disk Stack Assembly Head Stack AssemblyVoice Coil Motor and Actuator Latch Assemblies Air Filtration SystemDrive Electronics Digital Signal Process and Interface ControllerDisk Controller DDR Host Interface Control Block Buffer Control BlockDisk Ldpc Control Block Disk Control BlockFrequency Synthesizer Power Management Read/Write ICTime Base Generator Automatic Gain ControlAnalog Anti-Aliasing Low Pass Filter Analog to Digital Converter ADC and FIRRead and Write Operations Servo SystemRead Channel Write Channel Firmware FeaturesRead Caching Write Caching Defect Management Automatic Defect AllocationSmart 6 APMSata II Interface Sata TerminologySpinpoint M8-DVR Disti Product Manual REV Physical Interface Signal Summary Signal DescriptionsWhen read When written 2 I/O Register AddressControl Block Register Descriptions RegistersCommand Block Register Descriptions Command Register Ex F7h Device Register Ex F6hStatus Register Ex F7h Sata II Feature SET Device Activity SignalStaggered Spin-up Disable Control Auto-Activate in DMA Setup FISPhy. Event Counters Software Settings Preservation Sata Power ManagementCommand Table ATA Command DescriptionsCommand Code Parameters Smart Command Descriptions Check Power Mode E5hDevice Configuration Overlay B1h Download Micro Code 92hDevice Configuration Identify data structure Word Content Execute Device Diagnostics 90h Diagnostic CodesFlush Cache E7h, EAh extended Format Track 50hContent Description Identify Device information=the fields reported in word 88 are valid EXT =Media Card Pass Through command feature set supported Word Content Description WWNIdle E3h Automatic Standby Timer PeriodsIdle Immediate E1h Initialize Device Parameters 91h NOP 00hRead Buffer E4h Read DMA C8h, 25h extendedRead Log Extended 2Fh Read Multiple Command C4h, 29h extendedRead Long 22h Read Sectors 20h, 24h extended Read Native Max Address F8h, 27h extendedRead Verify Sectors 40h, 41h extended Security Disable Password F6h Recalibrate 10hSecurity Erase Prepare F3h Security Erase Unit F4hSecurity Set Password F1h Security Erase Unit PasswordSecurity Set Password data content Security Freeze Lock F5hSet Features EFh Identifier Level Command resultSecurity Unlock F2h Seek 7xh11 Set Features Register Definitions 12 Transfer Mode ValuesSet Multiple Mode C6h 13 Set Max Feature Register ValuesSet Max Address F9h, 37h extended Sleep E6h14 Smart Feature Registers Values Smart disable operations D9hSmart enable/disable attribute auto-save D2h Smart B0hSmart enable operations D8h Smart execute off-line immediate D4hSmart read data D0h 15 Device Smart Data StructureByte Bit Name Description 16 Smart Attribute Status Flags17 Smart Attribute Data List 18 Off-line Data Collection Status ValuesSelf-test execution status byte 19 Self-test Execution Status ValuesSmart return status DAh Smart read log sector D5hSmart write log sector D6h Standby Immediate E0h Write Buffer E8hWrite DMA CAh, 35h extended Write Fpdma Queued 61hWrite Long 32h Write Multiple Command C5h, 39h extendedWrite Sectors 30h, 34h extended Spinpoint M8-DVR Disti Product Manual REV Maintenance Precautions MaintenanceGeneral Information HDD handling guide -Please handle HDD by side surfaces Service and Repair HDD handling guide Prevent Shocks

M8-DVR specifications

The Samsung M8-DVR is an advanced digital video recorder designed to meet the ever-evolving demands of modern surveillance and recording needs. This cutting-edge device combines state-of-the-art technology with user-friendly features, making it a reliable choice for both residential and commercial applications.

At the core of the M8-DVR’s design is its high-definition recording capability. The device supports various resolutions, including Full HD 1080p, ensuring that all captured footage is crystal clear. This clarity is crucial for identifying details, whether for security purposes or monitoring activities around the clock. It can accommodate multiple camera inputs, allowing users to expand their surveillance network seamlessly.

One of the standout features of the M8-DVR is its remarkable storage capacity. Equipped with advanced hard disk technology, it can store several terabytes of footage, which can be further expanded using additional drives. This means that even with continuous recording, users won’t have to worry about running out of storage quickly. The device also incorporates efficient compression technologies, such as H.265, which allows for reduced file sizes without sacrificing video quality.

In terms of connectivity, the M8-DVR offers various options, including Ethernet ports for network connectivity, USB ports for data transfer, and HDMI output for direct connection to monitors. This versatility allows users to easily stream live footage or review recordings on larger screens. The device supports remote viewing through mobile applications, allowing users to monitor their property from virtually anywhere in real-time.

User experience is further enhanced by an intuitive interface that makes navigation simple and efficient. It includes features like motion detection and alerts, which notify users of any unusual activities. The advanced search function is another highlight, enabling users to quickly locate specific events in their recordings without long hours of scrolling.

The Samsung M8-DVR is also designed with durability in mind. It comes with robust security features to protect against unauthorized access and offers backup options to prevent data loss. With its blend of technology, storage capabilities, and user-friendly design, the Samsung M8-DVR stands out as a comprehensive solution for modern video surveillance needs, making it an essential tool for enhancing security and peace of mind in any environment.
Top Page Image Contents