Boston Acoustics TVeeTM owner manual Parts of TVee, Soundbar Status Indicator

The Parts of TVee

1	2	3	4	5	6	7	8	9
						INPUT		POWER
						R	DC24V
					TRIM LEVEL		2.5A
					2	1
				WIRELESS ID 3
						L
		MUTE		1 2 3 4

		INPUT
		POWER
	R	DC24V
TRIM LEVEL		2.5A
3	2
	1
WIRELESS ID	L
1 2 3 4

10 Audio connection cable

1Status Indicator – Lights in various colors to indicate operating status. See the table below.

2Power Button – Lets you manually activate TVee or put it in standby mode.

3Mute Button – Lets you temporarily mute TVee.

4Volume Up and Down Buttons – Let you manually adjust the volume of the TVee.

5Wireless ID Switch – Selects the “channel” for the wireless Bass Unit signal. Set 11 in the same position.

6Trim Level Switch – Adjusts the input sensitivity of TVee.

7Inputs – Receives the input signal for the TVee. See the “Connect TVee” section for more information.

8Power Input – Connect the power supply 10 here.

9Power On/Off Switch – Turns the TVee soundbar on or off. Normally it is left on all the time.

10Power Supply – Provides power to the soundbar. Plug it into the wall and connect it to the power input 8.

		MUTE
Soundbar Status Indicator
Green Steady	Normal power-on mode.
Green Blinks Once	Shows a remote control signal is being received.
Orange Flashing	TVee is ready to learn a remote control command.
Orange Steady	The control button that’s learning a control command is selected; TVee waiting
	for an IR command to learn.
Flashing Green	TVee has successfully learned a remote control command.
Flashing Red	TVee has failed to learn a remote control command.
Flashing Red and Orange	Indicates learned IR codes successfully erased.

3