Boston Acoustics TVeeTM owner manual Troubleshooting TVee, Soundbar does not power on

Page 8

Typically you’ll never need to adjust these switches. What are they for? If you have more than one TVee system in your house you can use different Wireless ID Switch settings so the systems won’t interfere with each other.

Trim Level Switch – This changes the input sensitivity of TVee. If the output of your television is too low, you may need to change the trim level switch to “1” to make it louder. Conversely, if you hear distortion in the audio signal, try the “3” setting to make the input quieter.

Troubleshooting TVee

Soundbar does not power on.

Is the power supply plugged into a live wall outlet?

Is the power supply properly connected to the soundbar power input?

Is the rear panel power switch in the “on” position?

Bass unit does not power on.

Is the bass unit plugged into a live wall outlet?

Is the rear panel power switch in the “on” position?

Is the fuse blown? Replace it with the same type. If it quickly blows again the unit may need service.

No sound from TVee.

Is the signal input connected to an output that is providing a signal?

Are the soundbar and bass unit receiving power and turned on?

Turn up the volume of the TVee soundbar.

Turn up the volume of the television or cable box TVee is connected to.

Check Mute status – is the status indicator blinking green? Press the Mute button on the soundbar.

No Sound from the Bass Unit.

Check the points in the “Bass unit does not power on.” section above.

Turn up the volume control.

Be sure the Wireless ID switches on the soundbar and bass unit are set to the same number.

Distorted sound from the Soundbar.

Change the Trim Level switch setting to higher number.

Check the signal source to be sure the distortion is not originating there.

Bass not loud enough.

Turn up the bass unit Volume control.

Place the bass unit closer to a corner of the room.

TVee won’t learn my remote control commands.

Carefully follow the programming instructions.

Hold the remote steady and 12 inches from the front of the soundbar.

Press and release the remote control button s l o w l y !

Note: TVee learns almost all IR commands, but some IR protocols cannot be programmed.

There is a “pop” noise when I turn of my television.

Program TVee to be turned on and off with the power button on your television remote control.

Volume of my television speakers gets louder than my TVee system over time.

When the remote control volume button is held down your television may change volume levels faster then TVee. SUse the buttons on the soundbar to adjust the volume of the TVee to the correct balance with the television speakers.

The woofer seems to have interference with its wireless signal.

Try changing settings of the Wireless ID switches on both the soundbar and bass unit.

The bass unit could be too far from the soundbar to get a good signal. Try moving it closer.

7

Image 8
Contents TVee Model Two Not working? Important Safety Instructions Soundbar Status Indicator Parts of TVeePlacing TVee SpecificationsAbout TVee Connect TVee Fire Up TVeeDetails About TVee Fine Tune TVeeControl TVee Troubleshooting TVee Soundbar does not power onLimited Warranty If Service Seems NecessaryJubilee Drive, Peabody, MA 01960 USA

TVeeTM specifications

The Boston Acoustics TVeeTM is a premium soundbar system designed to transform your home entertainment experience. With a keen focus on delivering superior audio quality, this device integrates various innovative technologies to enhance sound reproduction, making it a worthy addition to any television setup.

One of the standout features of the TVeeTM is its sleek, modern design, which seamlessly complements contemporary aesthetics. This soundbar is compact and lightweight, ensuring that it fits comfortably beneath flat-screen televisions without taking up excessive space. Its understated elegance allows users to enjoy rich audio without compromising their living room's visual appeal.

The TVeeTM system is equipped with advanced audio technologies, such as the patented BassTrac circuitry, which allows the soundbar to produce deep, powerful bass without distortion, even at higher volume levels. This feature is particularly crucial for action-packed movies and music genres that thrive on robust bass response. Additionally, the soundbar includes a built-in subwoofer, negating the need for external subwoofer units and simplifying the setup process.

Another significant characteristic of the Boston Acoustics TVeeTM is its compatibility with various audio sources. It includes multiple connectivity options, such as optical, coaxial, and auxiliary inputs, ensuring that users can easily connect it to their televisions, gaming consoles, and music players. Moreover, it can effortlessly integrate with Bluetooth devices, allowing for wireless streaming of content from smartphones and tablets. This versatility makes the TVeeTM an ideal solution for diverse entertainment needs.

Setup is also remarkably easy, thanks to the included remote control, which allows users to adjust volume, bass levels, and sound modes with ease. The system supports multiple sound modes, including movie, music, and dialogue enhancement, which optimizes audio playback depending on the content being enjoyed.

In conclusion, the Boston Acoustics TVeeTM soundbar is an impressive audio device that combines elegant design, powerful performance, and flexible connectivity options to elevate any home entertainment experience. Whether for movie nights or listening to music, this system delivers remarkable sound that captivates audiences and enhances viewing pleasure. The TVeeTM is a testament to Boston Acoustics’ commitment to quality audio engineering, ensuring the perfect complement to any modern multimedia setup.