Samsung SW-248F Upgrading the Firmware Flash Memory, System Requirements, Description

Page 13

Upgrading the Firmware Flash Memory

The product firmware can be upgraded by downloading the updated file from the following Web site:

http://www.samsung-ODD.com

http://www.samsungelectronics.com/odd

Before you install the CD-R/RW drive, we strongly recommend that you check that your setup meets the system requirements listed below.

Item

Computer

Disk space Windows version

Intel Pentium II 400MHz(or higher), 64 MB of RAM (or higher) with an 80pin IDE interface for Ultra DMA.

700 MB minimum

Windows 98/2000/ME/XP/NT4.0 (or higher)

English - 14

Image 13

Contents Setup Safety PrecautionsUsing the Drive TroubleshootingNotational Safety PrecautionsInstallation Handle with caution to prevent damage from external shock While OperatingOther Front IntroductionRear Installing the CD-R/RW Drive SetupConnecting the Cables Connecting the E-IDE cable Connecting the power cableWhen using one E-IDE cable Master Drive Choose the MA JumperMaster Drive Choose the MA Jumper b Connecting the audio cable from a sound cardInstalling the Device Driver Installing the CD Record UtilitySetting Up the Device Driver Add the DEVICE=C\SAMSUNG\SSCDROM.SYS \DSSCD000/V entryUsing the CD-R/RW Drive Using the DriveStoring and Cleaning Your Discs Playing Audio CDsSystem Requirements Upgrading the Firmware Flash MemoryDescription Hard Drive TroubleshootingNetwork Drive CD-ROM DriveTerm Description About DMA Installation General DMA Installation Guide Windows 98/MeDMA Setting Recommended Disc TypesWhen recording Nero or Easy CD Creator ProblemRecorder cannot recognize the disc Meaning / Solution Technical Specifications SpecificationsSW-248F