Samsung S20A300N, S24A300BL, S23A300B Set to Off when viewing directly in front of the screen

Menu Description

This feature allows you to see optimal screen quality according to your viewing position.

When viewing the screen at an angle from below, above or the side of the monitor, by setting the appropriate mode for each position you can obtain a similar picture quality as viewing the screen directly from the front.

Set to <Off> when viewing directly in front of the screen.

•<Off> - Select when viewing from the front position.

•<Lean Back Mode1> - Select when viewing from a slightly lower position.

•<Lean Back Mode2> - Select when viewing from the lower position.

•<Standing Mode> -Select when viewing from the upper position.

•<Side Mode> - Select when viewing from the left or right position.

•<Group View> - Select when two or more persons view among ,, position at the same time.

Angle	• <Custom> -When <Custom> is selected, settings for <Lean Back Mode 1> is applied by default.
	Users can set suitable picture quality as needed.

	• This menu is unavailable when <	Bright> is set to <Dynamic Contrast> or <Cinema>
	mode.
	• This menu is unavailable when <	Color> is set.
	Removes vertical noise lines (line pattern) from the screen.
	The location of the screen may be changed after the adjustment. In this case, move the screen so
Coarse	that the screen is displayed at the center of the display panel using the <H-Position> menu.
	This function is only available in Analog mode.
	Removes horizontal noise lines (line pattern) from the screen.
	If you cannot remove the noise completely with the <Fine> function, adjust the <Coarse> and then
Fine	use the <Fine> function again.
	This function is only available in Analog mode.

Using the product 3-12