Samsung 770P, 970P manual Connecting the Monitor

Page 13

Connecting the Monitor

1.Connect the DC 14V adapter for the monitor to the power port on the Signal Box . Plug the power cord for the monitor into a nearby outlet.

2-1.Using the D-Sub (analog) connector on the video card.

Connect the 'DVI-A to D-SUB' cable to the DVI-I port on the Signal Box .

2-2.Connected to a Macintosh.

Connect the monitor to the Macintosh computer using the 'DVI-A to D-SUB' connection cable.

2-3.In the case of an old model Macintosh, you need to connect the monitor using a special Mac adapter.

3.Turn on your computer and monitor. If your monitor displays an image, installation is complete.

If you properly connect your monitor using the DVI-I connector but get a blank screen, check to see if the monitor status is set to analog. Press power button to have the monitor double- check the input signal source.

Image 13

Contents SyncMaster 770P / 970P Notational Do not use a damaged or loose plug Insert the power plug firmly so that it does not come looseUse only a properly grounded plug and receptacle Keep any heating devices away from the power cable Do not drop the monitor when moving itDo not place the product on the floor Set down the monitor carefullyDo not place the monitor face down CleanDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetKeep power adapter away from any other heat source Keep all power adapters apartRemove and discard vinyl bag from power adapter before use Falling product could cause physical damage even death Monitor Manual Users Guide Quick Setup GuideMonitor Driver Natural Color softwareDVI-I Signal BoxConnecting the Monitor Using the Stand Pivot Stand Click Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor Driver ManualPage How to install Microsoft Windows NT Operating System Click Start , Setting , Control PanelLinux Operating System Natural Color Natural Color Software Program How to install the Natural Color softwareInstallation Page Page Installation Problems MagicRotation Installation Problems MagicTuneSystem Requirements HardwareService Packs UninstallOverview OSD Mode sOverview OSD Mode Color Tone Color Tab DefinitionGamma Saturation Adjusts the color saturationImage Tab Definition Position Image SetupSharpness Option Tab DefinitionColor Calibration How multiple users can use adjusted color valuesColor Calibration Color CalibrationTroubleshooting TroubleshootingTo ensure normal operation, please restart your system Symptom Check List SolutionsWhat is MagicRotation? Basic Function InterfaceInterface To execute AutoRotation, it should be done as belowPage Page Before You Call Technical Support Page Check List Display → Settings Answer Panel→Display→SettingsUseful Tips Input Signal, Terminated ResolutionPower Supply Signal CableDimensions WxDxH/ Weight Power ConsumptionState Normal Operation Power saving mode Power off Environmental considerationsPixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencyModel Name SyncMaster 970P 424 x 242 x 507 mm16.7 x 9.5 x 20.0 inch / 7.1 kg Horizontal Latin America North AmericaEurope Middle East & Africa Asia PacificVertical Frequency Dot PitchHorizontal Frequency Interlace and Non-Interlace MethodsMéxico Class BWhat is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications