Bose 601TM manual Placing the speakers, Choosing the speaker cord

Page 5

Setting Up

Placing the speakers

The product label on the back of each speaker indicates LEFT or RIGHT. For best acoustic performance, place the left speaker on the left side as you face your speakers and place the right speaker on the right side.

Keep the speakers 6 - 15 feet (1.8 - 6 m) apart and at least 10 inches (25 cm) from side walls (see Figure 3).

It is important not to block the acoustic components at the rear of each speaker. To avoid this, place each speaker at least 8 inches (20 cm) from the wall behind it.

Figure 3

Ideal speaker placement

8" minimum (20 cm)

6 - 15 ft

(1.8 - 6 m)

10" minimum

(25 cm)

Note: Bose® 601TM speakers are not intended to hang from walls, or to stand on shelves or tables. They are designed as floor-standing speakers only.

WARNING: To prevent personal injury, do not place your speakers in high-traffic areas where they can be accidentally knocked over.

Note: To prevent interference with your TV picture quality, place each speaker at least 2 feet (.6 m) from your TV screen.

Figure 4

Place each speaker at least 2 feet (.6 m) from your TV screen.

2 ft

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 ft

minimum

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

minimum

(.6 m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(.6 m)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Choosing the speaker cord

It is important to use the proper gauge (thickness) of speaker cord. Standard zip cord (2-con- ductor, 18-gauge or .82 mm2 wire or larger) is recommended for most applications. You can find this wire at most electrical and hardware stores.

If the length of speaker wire extends more than 20 feet (6 m) from a receiver or amplifier, refer to “Wire recommendations” on page 9 or contact your authorized Bose dealer for more infor- mation.

Running the speaker cord through a wall or under a floor

Make sure you have enough cord to reach from the receiver to each speaker. For in-wall installation, check your local building code requirements. Before proceeding, you may want to contact an electrical installer for information about your local building or safety regulations.

AM257731_00_V.pdf

October 25, 2001

5

Image 5
Contents Bose 601TM Series IV Direct/Reflecting Speaker System Declaration of Conformity Customer InformationContents Introduction Setting UpUnpacking the speakers Attaching the speaker grillesRunning the speaker cord through a wall or under a floor Placing the speakersChoosing the speaker cord Preparing the speaker cord Making the connectionsChecking the connections Setting your surround sound receiver or amplifierFor use in home theater For rear or surround speakersReference Information TroubleshootingTechnical information Customer serviceCleaning Reference Information