Bose 601TM manual Technical information, Customer service, Cleaning

Page 9

Reference Information

Technical information

Features

Direct/Reflecting® speaker technology

Stereo Everywhere® speaker technology

Proprietary bass reproduction

Automatic protection circuitry

Syncom® computer quality control

Speaker driver complement

Two 612" (16.5 cm) woofers

One 2" (5.1 cm) ferrofluid tweeter per cabinet

Compatibility

Compatible with A/V receivers and amplifiers rated from 10 to 200 watts per channel, rated from 4 to 8 ohms.

Power rating: 100 Watts IEC

Finish

Graphite gray

Light cherry

Dimensions/Weight

32"H x 8"W x 13.75"D (81 cm x 20 cm x 35 cm)

Each speaker weighs 30 lb (13.6 kg)

Wire recommendations

Based on maximum frequency response deviation of 0.5 dB

Gauge

Length

18

(0.82 mm2)

20 ft (6 m) maximum

16

(1.3 mm2)

30 ft (9 m) maximum

14

(2.1 mm2)

50 ft (15 m) maximum

12

(3.3 mm2)

80 ft (24 m) maximum

Customer service

For additional help in solving problems, contact Bose® customer service. Refer to the address list enclosed in the product packaging for correct phone numbers.

Cleaning

Wipe the 601TM speaker cabinets using a dry cloth. Do not use solvents or chemicals. Do not allow liquids to spill on, or objects to drop into the speaker grilles. You may vacuum the grilles carefully; the drivers are directly behind the grille cloth. No other maintenance is required.

AM257731_00_V.pdf

October 25, 2001

9

Image 9
Contents Bose 601TM Series IV Direct/Reflecting Speaker System Declaration of Conformity Customer InformationContents Introduction Setting UpUnpacking the speakers Attaching the speaker grillesPlacing the speakers Choosing the speaker cordRunning the speaker cord through a wall or under a floor Preparing the speaker cord Making the connectionsChecking the connections Setting your surround sound receiver or amplifierFor use in home theater For rear or surround speakersReference Information TroubleshootingCustomer service CleaningTechnical information Reference Information