3. Disassembly and Assembly
3-2. HAS STAND Disassembly
Description | Photo | Screws |
1.If the Stopper PIN at the back of the stand is not removed, place a soft cloth on the table and place the monitor on it, and then hold the monitor set and remove the Stopper PIN at the back of the stand.
2.Turn the monitor over. Remove the two (2) screws that hold the stand in place and then remove the stand.
Caution: When removing the screws, hold the stand body with one hand so that the stand does not fall.
3.The following steps are the same as steps 2 to 9 for disassembling the SIMPLE stand.
※The assembly is in the reverse order of disassembly.