Samsung 940T manual Brightness button, RGB in port

Brightness button	When OSD is not on the screen, push the button to adjust
[ ]	brightness.
Adjust buttons [ ]	Adjust items in the menu.
Enter button [ ] /	Activates a highlighted menu item.
Source button	Push the ' ', then selects the video signal while the OSD is off.
	(When the source button is pressed to change the input mode, a
	message appears in the upper left of the screen displaying the
	current mode -- analog or digital input signal.)
	Note : If you select the digital mode, you must connect your monitor
	to the graphic card's DVI port using the DVI cable.

AUTO button

Power button []/ Power indicator

Use this button for auto adjustment.

Use this button for turn the monitor on and off.

This light glows blue during normal operation, and blinking blue once as the monitor saves your adjustments.

See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods.

Rear

HAS Stand

(The configuration at the back of the monitor may vary from product to product.)

POWER port	Connect the power cord for your monitor to the power port on the back
	of the monitor.
DVI IN port	Connect the DVI Cable to the DVI port on the back of your monitor.
RGB IN port	Connect the signal cable to the 15-pin, D-sub port on the back of your
	monitor.
POWER on/off Switch	Use this button for turn the monitor on and off.
(option)	The Kensington lock is a device used to physically fix the system to
Kensington Lock
	something when using it in a public place. (The locking device has to
	be purchased separately.) For using a locking device, contact the
	place of purchase.

See Connecting the Monitor for further information regarding cable connections.