Samsung 933BW, 933GW Cannot see the On Screen Display, Screen suddenly has become unbalanced

Page 44

Troubleshooting

but the "Not Optimum Mode", "Recommended Mode 1440 x 900 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

Q:There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals?

A:The monitor is in PowerSaver mode.

A:Press a key on the keyboard to activate the monitor and restore the image on the screen.

A:If there is still no image, press the '' button. Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Q:Connected using the DVI cable?

A:You may get a blank screen if you boot the system before you connect the DVI cable, or dis- connect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals. Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

Q:Have you locked the On Screen Display (OSD) Menu to prevent changes?

A:Unlock the OSD by pressing the [MENU/ ] button for at least 5 seconds.

The screen shows strange colors or just black and white.

Q:Is the screen displaying only one color as if looking at the screen through a cellophane paper?

A:Check the signal cable connection.

A:Make sure the video card is fully inserted in its slot.

Q:Have the screen colors become strange after running a program or due to a crash between ap- plications?

A:Reboot the computer.

Q:Has the video card been set properly?

A:Set the video card by referring to the video card manual.

The screen suddenly has become unbalanced.

Q:Have you changed the video card or the driver?

A:Adjust screen image position and size using the OSD.

Q:Have you adjusted the resolution or frequency to the monitor?

A:Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).

Q:The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

43

Image 44
Contents LCD Monitor SyncMaster 933BW/933GWSafety Instructions PowerNotational Notational ConventionsInstallation Clean Others Page Page Page Page Unpacking Package ContentsIntroduction Your Monitor Initial Settings FrontRear Enter buttonUsing the Anti-Theft Kensington Lock Cable holding ring Connecting Cables ConnectionsUsing the Stand Folding the base Attaching a BasePage Using the Software Installing the Monitor Driver AutomaticMonitor Driver Internet web siteInstalling the Monitor Driver Manual Page Page Page Page Page Page Natural Color Natural Color Software Program How to install the Natural Color softwareHow to delete the Natural Color software program System Requirements MagicTune InstallationInstallation Problems Uninstall HardwareOSD Lock & Unlock Adjusting the MonitorDirect Functions Customized key MagicBright MagicColor Color Effect- Image SizePicture Brightness BrightnessOSD Function Contrast MagicBrightColor MagicColorColor Tone Color ControlColor Effect GammaOff Grayscale Green Aqua Sepia ModeImage Coarse FineSharpness PositionOff LanguageTransparency Setup Reset Display TimeSec 10 sec 20 sec 200 sec YesOff On Off TimerAuto Source Image Size InformationAuto Manual Auto WideTroubleshooting Self-Test Feature CheckEnvironment Useful TipsCheck List No images on the screen. I cannot turn on the monitorScreen suddenly has become unbalanced Cannot see the On Screen DisplayScreen shows strange colors or just black and white LED is blinking but no images on the screen Screen is out of focus or OSD cannot be adjustedCheck when MagicTune does not function properly MagicTune doesnt work properly Page Specifications GeneralPowerSaver Environmental considerationsPlug and Play Capability Dot AcceptablePreset Timing Modes Display area Mm H x 255.15 mm Pixel Pitch Mm H x 0.2835 mm PowerSaver Specifications Product Information Image Retention Free InformationFor Better Display Display Information together with Logo or Moving image cycle Page Our LCD Monitor satisfies ISO13406-2 Pixel fault Class Appendix Contact Samsung WorldwideNorth America Latin AmericaCIS Asia PacificTerms Middle East & AfricaCorrect Disposal Authority