Samsung 920LM manual Monitor Assembly, Attaching a Base, Simple stand

Page 15

Monitor Assembly

Monitor and Bottom

Attaching a Base

This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.

Simple stand

A.Monitor

B.Mounting interface pad (Sold separately)

1.Turn off your monitor and unplug its power cord.

2.Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen.

3.Remove screws and then remove the stand from the LCD monitor.

4.Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base.

zDo not use screws longer than the standard dimension, as they may damage the inside of the Monitor.

zFor wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications.

zDo not use screws that do not comply with the VESA standard screw specifications.

Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury.

Samsung is not liable for these kinds of accidents.

zSamsung is not liable for product damage or personal injury when a non-VESA or non-

Image 15

Contents SyncMaster 920LM Notational PowerUse only a properly grounded plug and receptacle Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugInstallation Do not drop the monitor when moving itDo not place the product on the floor Do not place the monitor face down CleanKeep any heating devices away from the power cable Put down the monitor carefullyOthers Do not spray water or detergent directly onto the monitorDo not remove the cover or back Do not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Page Page Custom Cable Sub Cable Power Cord Audio Cable Front Menu buttonMenu MagicBright Rear Kensington Lock For using a locking device, contact where you purchase itConnecting the Monitor Using the StandRGB Monitor Assembly Attaching a BaseSimple stand Click Windows Microsoft Windows Vista Operating System Installing the Monitor Driver ManualPage Microsoft Windows XP Operating System Page Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelLinux Operating System Auto Menu Description OSD Lock & UnlockOSD Lock & Unlock MagicBright VolumeBrightness Contrast PictureColor MenuImage Color Tone Color Control GammaCool Normal Warm Coarse Fine Sharpness Position OSDLanguage Position Transparency Display Time SetupInformation Image Reset Color ResetInformation Check List SymptomSolutions Check ListModes Control Panel → Display → SettingsAnswer QuestionUseful Tips Self-Test Feature CheckPage General PowerSaver Horizontal Frequency Preset Timing ModesPixel Clock Sync Polarity Display Mode Frequency MHz KHz HorizontalEurope Contact Samsung WorldwideNorth America Latin AmericaAsia Pacific CISTerms For Better DisplayMiddle East & Africa Authority Suggestions for specific applications WarrantyWhat is Image retention ? Power Off, Screen Saver, or Power Save Mode