Modes, Control Panel → Display → Settings

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

The screen suddenly has become unbalanced.

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

"Not Optimum Mode", "Recommended Mode 1440 X 900 60 Hz" message appears for one minute and then disappears. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

Press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the [] button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

Unlock the OSD by pressing the [MENU / ] button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes).

The screen is out of focus or OSD cannot be adjusted.

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

Have you adjusted the resolution or	Adjust the resolution and
frequency on the monitor?	frequency of the video card.
	(Refer to the Preset Timing
	Modes).

LED is blinking but no images on the screen.

There are only 16 colors shown on the screen.

The screen colors have changed after

Is the frequency properly adjusted when checking the Display Timing on the menu?

Have the Windows colors been set properly?

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to product.)

Windows ME/2000/XP:

Set the colors properly at the

Control Panel → Display → Settings.

changing the video card.

There is a message that reads

Has the video card been set	Set the video card by referring to
properly?	the video card manual.
Have you installed the monitor	Install the monitor driver
driver?	according to the Driver Installation