Samsung 920XT manual Q & A, Check the following items if there is trouble with the monitor

Page 58

If problems repeatedly occur, contact an authorized service center.

memory to the USB port, but they do not work.

The file list does	1)	Check the files on the card. If only abnormal files (e.g. 0KByte, broken JPEG)
not appear.	exist, the files do not appear on the screen.
	2)	The time required to display is determined by the size of the file. Wait a
	moment.
	3)	Check if the format of the file is supported by the Client Monitor. If the
	extension of the file has been changed, the file will not be played.

Check the following items if there is trouble with the monitor.

Check if the power cord and the video cables are properly connected to the computer.

Check if the computer beeps more than 3 times when booting.

(If it does, request an a service for the main board of the computer.)

If you installed a new video card or if you assembled the PC, check if the installed the adaptor(video) driver and the monitor driver.

Check if the scanning ratio of the video screen is set at 56 Hz ~ 75 Hz. (Do not exceed 75 Hz when using the maximum resolution.)

If you have problems in installing the adaptor (video) driver, boot the computer in Safe Mode, remove the Display adaptor at the "Control Panel → System → Device Administrator" and then reboot the computer to reinstall the adaptor (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used.

(Refer to the computer or the video card manual for details.)

Windows XP :

Set the resolution at the Control Panel → Appearance and Themes → Display → Settings.

Windows ME/2000 :

Set the resolution at the Control Panel → Display → Settings.

Contact the video card manufacturer for details.

Windows XP :

Set the resolution at the Control Panel → Appearance and Themes → Display → Screen Saver.

Set the function at BIOS-SETUP of the computer.

Windows ME/2000 :

Set the resolution at the Control Panel → Display → Screen Saver.

Set the function at BIOS-SETUP of the computer.

Refer to Windows/Computer Manual

Disconnect the power cord and then clean the

Image 58

Contents SyncMaster 720XT/ 920XT Install programsInstall drivers Power NotationDo not use the power cord when the connector or plug is dusty Insert the power plug firmly so that it does not come looseDo not disconnect the power cord while using the monitor Do not use a damaged or loose plugInstallation Any increase in the internal temperature may cause fire Keep any heating devices away from the power cableA melted coating may cause electric shock or fire Put down the monitor carefullyCleaning and Using OthersFailure to do so may cause an electric shock or fire The monitor may malfunction, causing electric shock or fireThis may cause a malfunction, electric shock or fire Do not cover the vents on the monitor cabinetExcessively loud volume level may damage hearing An inappropriate resolution may cause undesirable picture qualityKeep the volume at a comfortable level when using the headphones This may cause an explosion or fireProper Seating Posture During Monitor Use Correct Disposal of This Product z Keep your arms level with the back of your handsz Keep the angle of the elbow perpendicular Waste Electrical & Electronic Equipment - Europe onlyFeatures What is a network monitor?Contact a local dealer to buy optional items Package ContentsYour Monitor UnpackingMENU button Click here to see an animation clipThe locking device has to be purchased For using a locking device, contact whereRear separatelyPage The host PC must have an IP address Connecting CablesConnect to the host PC using a LAN cable Use the VGA IN port to directly connect the monitor to a PCConnecting Cables When used as a normal monitor External Device ConnectionTilt angle Using the StandUsing Other Stands Swivel standz Please use Wall Mount according to the International standards Connectable Servers What is XPe Client?Logon A Citrix ICA Independent Computing Architecture ServerUser Windows XP Embedded DesktopAdministrator Log off, Restart, Shut downPrograms Citrix Program NeighborhoodPage 5. You can specify the color and size of the window to be displayed 7. Click Finish to complete creating the new connectionRemote Desktop The Remote Desktop ConnectionEnabling Your Computer as the Host Start a Remote Desktop Session on the Client Local Resource Specify whether to use the hard disks and ports Page RealVNC Server Internet Explorer Enable disk write protection and restart your computerEnhanced Write Filter Disable disk write protection and restart your computer Configuring UtilitiesControl Panel Write the changes to a diskD Drive Recover the SystemInstalling MUI Multi-language User Interface Saving FilesRecovery Using USB Memory When a system file is deleted accidentally or is corruptedHow to Recover the System Recovery Using Network BootingMonitor Driver Installing the Monitor Driver AutomaticInstalling the Monitor Driver Manual The certified driver will be posted on Samsung Monitor homepageClick Update Driver… in the Driver tab Microsoft Windows XP Operating System Insert CD into the CD-ROM drive Click Start → Control Panel then click the Appearance and Themes iconClick Display icon and choose the Settings tab then click Advanced Click the Properties button on the Monitor tab and select Driver tabClick the Close button then click OK button continually Click Start , Setting , Control Panel Double click the Display icon How to install Click Start , Setting , Control PanelSelect the Settings tab and click Advanced Properties button Microsoft Windows 2000 Operating SystemHow to install the Natural Color software Natural ColorNatural Color Software Program Installation Problems InstallationHow to delete the Natural Color software program It is recommended using MagicTune in Windows 2000 or laterUninstall Control Buttons Direct FunctionsAvailable in analog Mode Only AUTOOSD Lock & Unlock AUTO button button MENU buttonMagicBright When OSD is not on the screen, push / the button to adjust volume VolumeMenu Volume Menu MagicBrightImage Reset OSD FunctionSetup Color ResetMENU → → → , → MENU ColorNot available in MagicColor mode of Full and Intelligent MENU → → , → → , → MENUImage Available in analog Mode Only Setup Color parameters are replaced with the factory default values Menu Image Reset Color ResetImage parameters are replaced with the factory default values InformationShows a video source, display mode on the OSD screen Information MENU →Check List Refer to the Preset Timing Modesand the Preset Timing Modes Installation InstructionsCheck the following items if there is trouble with the monitor Contact the video card manufacturer for details Q & AIf problems repeatedly occur, contact an authorized service center Refer to Windows/Computer ManualSelf-Test Feature Check Self-TestSelf-Test Feature Check Warning Messages Environment Useful Tips Warning MessagesJudging the monitors working condition In this case, check the computer for troubleSpecifications Design and specifications are subject to change without prior notice ClientPowerSaver When used as a normal monitor PowerSaverServer Requirement PowerSaver When used as a Network monitor Preset Timing ModesPreset Timing Modes 135.000 79.97675.025 Horizontal FrequencySpecifications Design and specifications are subject to change without prior notice ClientPowerSaver When used as a normal monitor PowerSaverServer Requirement PowerSaver When used as a Network monitor 67.500 VESA, 1152 x60.000 Contact SAMSUNG WORLDWIDE BELGIUM VENEZUELAEurope 02 201Vertical Frequency TermsDot Pitch Horizontal FrequencyAuthority For Better DisplayResolution Power Off, Screen Saver, or Power Save Mode WarrantyWhat is Image retention ? Suggestions for specific applicationsTo prevent this, the accumulated voltage difference must be decreased