CONTROLS AND INDICATORS
3.Press and hold 
until all five source buttons light. The remote is now in the setup mode.
4.Press 
. Only this button will remain lit.
5.On the number keypad, enter the device code for
your brand of TV. The TV source button (
) should blink twice and then turn off. 
Note: If all five source buttons flash rapidly three times, the code was invalid. Go back to Step 1 and try another code.
6.Point the remote at your TV and press TV power.
Source buttons
Source power buttons
TV power
If your TV does not respond, go back to Step 1 and try another code.
To program the remote to control other devices:
Follow the same procedure for each of your other devices, using the appropriate device code and source button for each one.
To control a combination device:
• If you are programming the remote to control a combination device that has more than one source,
such as a VCR/DVD unit, you can program the associated code for either source button. For convenience, you may want to program the code twice – once for the VCR button and once for the DVD button.
•To find the right device code, first search the “COMBINATION” listings in the Universal Remote Device Codes book. If you cannot find a valid code there, then search the listings for individual device types (TV, CBL, VCR, DVD, etc.).
English – 5