Connecting Your Monitor
1.Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet.
2.Connect the signal cable to the video port on your computer, video board, video card, or graphics card.
3.If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter(Adapter not included). A
4.Turn on your computer and monitor. If your monitor displays an image, installation is complete.
file://\\yklee\en_ko\ko\setup\index.htm | 1/7/2003 |