zThe product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000
zRestrictions on
o chlorinated and brominated flame retardants and polymers o heavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user- friendly direction. Our labelling system started with displays in 1992 and is now requested by users and
For more information, Please visit
www.tcodevelopment.com
TCO'03 Recycling Information (TCO'03 applied model only)
[European Residents Only]
For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of residence. For those who reside in other countries, please contact a nearest local Samsung dealer for recycling information for the products to be treated in environmentally acceptable way.
| [U.S.A. Residents Only] |
| [European Residents Only] |
| |
| U.S.A. | SWEDEN | NORWAY | GERMANY | |
COMPANY | Solid Waste Transfer & | ELKRETSEN | Elektronikkretur AS | vfw AG | |
Recycling Inc | |||||
|
|
|
| ||
|
| ELKRETSEN Box |
| Max Plank Strasse 42 | |
| 442 Frelinghuysen Ave | 1357, 111 83 | 6454 Etterstad 0602 Oslo | ||
ADDRESS | 50858 Collogne | ||||
Newark, NJ 07114 | Stockholm | Fyrstikkalln 3B | |||
| Germany | ||||
|
| Barnhusgatan 3, 4 tr. |
| ||
|
|
|
| ||
TELEPHONE | 23 06 07 40 | 49 0 2234 9587 - 0 | |||
FAX | Fax: | 23 06 07 41 |
| ||
E- | none | adm@elektronikkretur.no | |||
|
|
|
| ||
HOME | http://www.bcua.org/Solid | http://www.el- | http://www.elretur.no/ |
| |
PAGE | Waste_Disposal.htm | kretsen.se/ |
| ||
|
|
Medical Requirement
Classifications:
In accordance with UL
EMC
This equipment has been tested and found to comply with the limits for medical devices to the IEC
zReorient or relocate the receiving device.
zIncrease the separation between the equipment.
zConnect the equipment into an outlet on a circuit different from that to which the other device
(s) are connected.
zConsult the manufacturer or field service technician for help.