Samsung 960BF, 760BF manual Question, Answer, Self-Test Feature Check

Page 49

graphic card?

http://www.samsung.com/monitor/magictune.

Visit our website and download the installation software for MagicTune™ MAC.

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the video cables are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 56Hz ~ 75Hz. (Do not exceed 75Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel→System→Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

If problems repeatedly occur, contact an authorized service center.

Q & A

Question

How can I change the frequency?

Answer

Frequency can be changed by reconfiguring the video card.

Note that video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.)

How can I adjust the resolution?

How can I set the Power Saving function?

How can I clean the outer case/LCD Panel?

Windows ME/XP/2000 : Set the resolution at the Control Panel→Display→Settings.

* Contact the video card manufacturer for details.

Windows ME/XP/2000 : Set the function at BIOS-SETUP of the computer or the screen saver. (Refer to Windows/Computer Manual).

Disconnect the power cord and then clean the monitor with a soft cloth, using either a cleaning solution or plain water.

Do not leave any remains of the detergent nor scratch the case. Do not allow any water to go inside the monitor.

Self-Test Feature Check

Self-Test Feature Check Warning Messages Environment Useful Tips

Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly.

Self-Test Feature Check

1.Turn off both your computer and the monitor.

2.Unplug the video cable from the back of the computer.

3.Turn on the monitor.

If the monitor is functioning properly, you will see a box in the illustration below.

Image 49

Contents SyncMaster 760BF / 960BF Notational PowerDo not disconnect the power cord while using the monitor Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not drop the monitor when moving it InstallationKeep any heating devices away from the power cable Do not place the product on the floorSet down the monitor carefully CleanDo not place the monitor face down Do not spray water or detergent directly on the monitorDo not remove cover or back OthersNever insert anything metallic into the monitor openings Do not cover the vents on the monitor cabinetKeep power adapter away from any other heat source Keep all power adapters apartRemove and discard vinyl bag from power adapter before use Falling product could cause physical damage even death RTA Monitor RTAResponse Time Accelerator List of FeaturesUnpacking MonitorMagicRotation software Natural Color softwareFront For using a locking device, contact where you purchase it Power indicator / Power buttonRear DVI-I Connecting the Monitor Pivot Stand Using the StandClick Windows ME Driver Windows MEWindows XP/2000 Click Windows XP/2000 DriverMicrosoft Windows XP Operating System Installing the Monitor Driver ManualPage Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelLinux Operating System How to install the Natural Color softwareNatural Color Software Program Page Installation Page Page Installation Problems MagicRotation Installation Problems MagicTuneSystem Requirements HardwareService Packs UninstallOverview OSD Mode sOverview OSD Mode Color Tone Color Tab DefinitionGamma Saturation Adjusts the color saturationImage Tab Definition Position Image SetupSharpness Option Tab DefinitionColor Calibration How multiple users can use adjusted color valuesColor Calibration Color CalibrationTroubleshooting TroubleshootingTo ensure normal operation, please restart your system Symptom Check List SolutionsWhat is MagicRotation? Basic Function InterfaceInterface To execute AutoRotation, it should be done as belowPage Page Before You Call Technical Support Page Help It shows the Help of MagicRotation program Uninstall Page Uninstall Troubleshooting No Connection Check Signal Cable on the screen? SymptomWhen connecting DVI-A to D-Sub Cable When connecting DVI cableInstallation Instructions Display → SettingsQuestion Self-Test Feature CheckAnswer Useful Tips Input Signal, Terminated ResolutionPower Supply Signal CableDimensions WxDxH/ Weight Power ConsumptionState Normal Operation Power saving mode Power off Environmental considerationsPixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencyModel Name SyncMaster 960BF Less than 38W Horizontal North America CIS Vertical Frequency Dot PitchHorizontal Frequency Interlace and Non-Interlace MethodsMéxico Class BWhat is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applications

Related manuals

Manual 63 pages 53.68 Kb