Samsung 2333TN user manual Product Operating Buttons, Icon Description

3-4 Product Operating Buttons

Product Operating Buttons

ICON	DESCRIPTION
	Press this button to view the On Screen Display (OSD).
	This button is also used to exit the OSD or to return to a higher-level OSD menu
	* OSD Adjustment Lock
	This function locks the OSD in order to maintain the current settings or to prevent the settings
	from being changed by another person
	On: If you press and hold the MENU button down for 5 seconds, the OSD Adjustment Lock
	function is activated.
	Off: If you press and hold the MENU button down for 5 seconds again, the OSD Adjustment
	Lock function is disabled.
	Even if the OSD Adjustment Lock function is activated, users can adjust the brightness
	and contrast and can set up the adjustment function assigned to the [ ].
▲/▼	Use these buttons to navigate the menu or to adjust a value in the OSD.
	Use this button to control the brightness of the screen.

Users can set the <Customized Key> to one of the following functions. If the user presses the

Customized Key[ ] after setting it, the configured function will be performed.

•<MagicBright> - <MagicColor> - <Color Effect> - <Image Size>

You can set the function of the <Customized Key> by selecting <SETUP&RESET> -> <Customized Key> in the OSD.

Use this button to select a function.

If you press the [ ] button when there is no OSD, the input signal (Analog/Digital) is

switched. When the input signal is switched by pressing [ ] button or the product is turned on, a message displaying the selected input signal appears at the top left of the screen.

• To select Digital mode, you have to connect the product and the PC with the DVI cable.

•This function is not available for products with an Analog interface only.

3-4 Using the product