Samsung 226CW manual

Page 7

This may cause electric shock or fire.

Refer to a qualified servicing company.

If your monitor does not operate normally - in particular, if there is any unusual sound or smell coming from the monitor - unplug it immediately and the Service Center.

This may cause electric shock or fire.

Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle.

This may cause a malfunction, electric shock or fire.

In particular, avoid operating the monitor near water or outdoors where it could be exposed to snow or rain.

If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center.

The monitor may malfunction, causing electric shock or fire.

Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time.

Failure to do so may cause electric shock or fire.

Do not try to move the monitor by pulling only the wire or the signal cable.

This may cause a breakdown, electric shock or fire due to damage to the cable.

Do not move the monitor right or left by pulling only the wire or the signal cable.

This may cause a breakdown, electric shock or fire due to damage to the cable.

Do not cover the vents on the monitor cabinet.

Bad ventilation may cause a breakdown or fire.

Do not place water containers, chemical products or small metal objects on the monitor.

Image 7
Contents SyncMaster 226CW Notation PowerPage Installation Page Others Cleaning and UsePage Page Good Postures When Using the Monitor Page Package Contents FeaturesSold separately Monitor & Simple stand ManualCable OthersFront Your MonitorRear Not available in MagicBright mode of Dynamic ContrastUsing the Stand Connecting CablesMonitor Assembly Tilt angle Swivel standAttaching a Base Page Monitor Driver Installing the Monitor Driver AutomaticInstalling the Monitor Driver Manual Page Page Page Page Page Natural Color Software Program How to install the Natural Color softwareHow to delete the Natural Color software program Natural ColorUninstall Installation Direct Functions Control ButtonsOSD Lock & Unlock AutoMagicBright Brightness OSD OSD FunctionColor Not available in MagicBright mode of Dynamic Contrast Image OSD RTA SetupInformation Or contact your dealer Check ListInstallation Instructions Feature is found only Self-Test Self-Test Feature CheckUseful Tips EnvironmentSpecifications EPA/ENERGY PowerSaverPreset Timing Modes Preset Timing ModesPage Contact Samsung Worldwide Belgium Terms Authority For Better DisplayProduct Information Image Retention Free