Samsung 2220WM manual There is no image on the screen

Page 37

There is no image on the screen.

Is the power indicator on the monitor blinking at 1 second intervals?

Connected using the DVI cable?

Hz, a "Not Optimum

Mode","Recommended mode

1680 x 1050 60 Hz" message is displayed. If the display exceeds 85 Hz, the display will work properly but the "Not Optimum

Mode","Recommended Mode 1680 x 1050 60 Hz" message appears for one minute and then disappears.

Please change to the recommended mode during this one-minute period.

(The message is displayed again if the system is rebooted.)

The monitor is in PowerSaver mode.

press a key on the keyboard to activate the monitor and restore the image on the screen.

If there is still no image, press the '' button.

Then press any key on the keyboard again to activate the monitor and restore the image on the screen.

You may get a blank screen if you boot the system before you connect the DVI cable, or disconnect and then reconnect the DVI cable while the system is running as certain types of graphic cards do not send out video signals.

Connect the DVI cable and then reboot the system.

I cannot see the On Screen Display.

The screen shows strange colors or just black and white.

Have you locked the On Screen Display (OSD) Menu to prevent changes?

Is the screen displaying only one color as if looking at the screen through a cellophane paper?

Have the screen colors become strange after running a program or due to a crash between applications?

Unlock the OSD by pressing the [MENU / ] button for at least 5 seconds.

Check the signal cable connection.Make sure the video card is fully inserted in it's slot.

Reboot the computer.

The screen suddenly has become unbalanced.

Has the video card been set properly?

Have you changed the video card or the driver?

Have you adjusted the resolution or frequency to the monitor?

Set the video card by referring to the video card manual.

Adjust screen image position and size using the OSD.

Adjust the resolution and frequency at the video card.

(Refer to the Preset Timing Modes).

The screen can be unbalanced due to the cycle of the video card signals. Readjust Position by referring to the OSD.

The screen is out of focus or OSD cannot be adjusted.

LED is blinking but no images on the screen.

Have you adjusted the resolution or frequency on the monitor?

Is the frequency properly adjusted when checking the Display Timing on the menu?

Adjust the resolution and frequency of the video card.

(Refer to the Preset Timing Modes).

Adjust the frequency properly by referring to the video card manual and the Preset Timing Modes.

(The maximum frequency per resolution may differ from product to

Page 36 Page 38
Image 37
Page 36 Page 38
Contents SyncMaster 2220WM Notational PowerDo not disconnect the power cord while using the monitor Insert the power plug firmly so that it does not come looseDo not use a damaged or loose plug Use only a properly grounded plug and receptacleDo not drop the monitor when moving it InstallationDo not place the product on the floor Keep any heating devices away from the power cable CleanPut down the monitor carefully Do not place the monitor face downDo not spray water or detergent directly onto the monitor OthersDo not remove the cover or back Do not cover the vents on the monitor cabinet Never insert anything metallic into the monitor openings Page What is Image retention ? WarrantyPower Off, Screen Saver, or Power Save Mode Suggestions for specific applicationsPage Page MagicBright MenuCustom Rear For using a locking device, contact where you purchase it RGB Connecting the MonitorAttaching a Base Using the Stand Monitor AssemblyClick Windows Microsoft Windows Vista Operating System Installing the Monitor Driver ManualPage Microsoft Windows XP Operating System Page Page Microsoft Windows NT Operating System How to install Click Start , Setting , Control PanelLinux Operating System Auto AutoMenu OSD Lock & UnlockDescription OSD Lock & Unlock Menu DescriptionMagicBright VolumeSource PictureBrightness Contrast ColorDescriptionPlay/Stop Color Tone Color Control Gamma ImageCool Normal Warm Coarse FineSharpness Position OSDLanguage Information SetupInformation Solutions SymptomCheck List Check ListThere is no image on the screen Question Control Panel → Display → SettingsAnswer Self-Test Feature Check Useful Tips General PowerSaver Pixel Clock Sync Polarity Display Mode Frequency MHz KHz Preset Timing ModesHorizontal Horizontal FrequencyNorth America Contact Samsung WorldwideLatin America EuropeAsia Pacific CISFor Better Display TermsMiddle East & Africa Authority
Top Page Image Contents