Samsung DP17LS/LT, DP15HS/HT manual Display Control Adjustments, Centering

Page 11

4 Alignment and Adjustments

4-2 Display Control Adjustments

4-2-1 HIGH VOLTAGE ADJUSTMENT

Signal:

1024 x 768 (68 kHz/85 Hz) (17Ó)

 

800 x 600 (54 kHz/85 Hz) (15Ó)

Display image: DonÕt care

Contrast:

Minimum

Brightness:

Minimum

Limit:

26.5 kV ± 0.2 kV (17Ó)

 

25 kV ± 0.2 kV (15Ó)

exception) 26.0 kV ± 0.2 kV for 17Ó SDD CRT that the DY type is DMX-1791AT

Measure the hight voltage level at the anode cap. High voltage should be within the limit as above. If the high voltage needs adjustment use the following procedure.

PROCEDURE

1.Turn the power off and disconnect the AC line cord from the power source.

2.Turn the power on after connecting high voltage Probe.

3.Using the jig, adjust the high voltage to the specification.

* High Voltage Adjustment PROCEDURE using Softjig

①Select matching model name in ÒModelÓ field.

➁Select Ò @7: Zero BeamÓ in menu after selecting ÒExtra 1Ó

➂Adjust high voltage using control bar after selecting ÒHV MINÓ

➃Turn the power off/on after adjustment finished.

➄Check the high voltage has been fixed with adjusted value after reselecting Ò@7: Zero BeamÓ.

4-2-2 SCREEN VOLTAGE ADJUSTMENT

CONDITIONS

 

Signal:

1024 x 768 (68 kHz/85 Hz) (17Ó)

 

800 x 600 (54 kHz/85 Hz) (15Ó)

Display image: DonÕt care

Contrast:

Minimum

Brightness:

Minimum

Limit:

26.5 kV ± 0.2 kV (17Ó)

 

25 kV ± 0.2 kV (15Ó)

Screen Voltage adjustment procedure using softjig is all the same as 4-2-1 but selecting ÒG2 CONTÓ on the contrary to ÒHV MINÓ.

Table 4-1

 

 

CRT type

Screen Voltage

 

 

 

 

 

 

M41QAR361X11*(*)

480V ± 10V

 

 

M41QAQ261X11*(*)

17”

M41LFQ903X28(L), etc

 

M41EHN325X160/3F**U

500V ± 10V

 

 

 

 

M41EHN323X160/3F**U

 

 

 

M41LLJ507XX43*(F5), (F5W3)

630V ± 10V

 

 

M41LLH507XX43*(F5)

 

 

 

M36QAM351X11*(*)

560V ± 10V

15”

M36LGE128X2**(*)

600V ± 10V

 

 

M36KUK35X02(*/LP), etc

520V ± 10V

4-2-3 CENTER RASTER

Adjust SW401 so that the back raster comes to the center when you apply each basic mode for 15Ó and 17Ó.

4-2-4 Centering

Centering means to position the center point of the display in the middle of the display area. Horizontal size and position and vertical size and position control the centering of the display.

Adjust the horizontal size and vertical size to their optimal settings: 306 mm (H) x 230 mm (V) for 17Ó, 267 mm (H) x 200 mm (V) for 15Ó.

Adjust the horizontal position and vertical position to ² 4.0 mm of the center point of the screen.

A-B ² 4.0 mm.

C-D ² 4.0 mm.

 

C

 

DISPLAY AREA

A

B

 

EDGE OF BEZEL

 

D

Figure 4-3. Centering

*In Softjig window, ÒGeometryÓ has to be selected for GD adjustment.

4-2-4 (a) HORIZONTAL SIZE ADJUSTMENT

CONDITIONS

Scanning frequency: 68 kHz/85 Hz (17Ó) 54 kHz/85 Hz (15Ó)

Display image: Crosshatch pattern

Brightness:Maximum

Contrast:Maximum

DP15H*/DP17L*

4-3

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Color Monitor Copyright Servicing the High Voltage VR and CRT PrecautionsSafety Precautions Product Safety NoticesElectrostatically Sensitive Devices ESD Precautions Servicing PrecautionsSpecifications Product SpecificationsSync Type Separate Pin AssignmentsIBM Vesa Timing ChartMemo Required Equipment Alignment and AdjustmentsAdjustment Conditions Before Making AdjustmentsSetup 2, Without Signal Generator Connecting the SoftJigCentering Display Control AdjustmentsStandard Modes Linearity LinearitySide Pincushion Adjustment Trapezoid AdjustmentPinbalance Adjustment Parallelogram AdjustmentColor Adjustments for 9300K Color AdjustmentsColor Coordinates Temperature Luminance Uniformity Check Focus AdjustmentColor Purity Adjustment For trained and experienced service technicians only No Power Supply TroubleshootingParts Level Troubleshooting Dpms Failure Correction Failure HDeflection FailureAbnormal HSize HLin. FailureInvariable HSize Tilt Failure Side Pin or Trap FailurePara. or Pin Balance Failure Size or Pos. Variation Failure Deflection FailureABL Failure High Voltage FailureDynamic Focus Failure No Video Micom Failure OSD Failure Degaussing Failure User Control FailureShut Down General TroubleshootingNo Picture Missing Color Visible Retrace Unsynchronized Image Misconvergence Purity Failure Poor FocusDP15HS Exploded View and Parts ListDP17LS Front Cover & CRT Ass’y DP15HS Chassis & Stand Ass’y DP15HS Rear Cover Ass’y DP15HS Front Cover & CRT Ass’y DP17LS Chassis & Stand Ass’y DP17LS Rear Cover Ass’y DP17LS Main PCB Parts Electrical Parts ListLoc. No CIS FBT FH1 Fuse ASSY,HEAT/SINK Carbon Metal Carbons Carbon Carbons Carbon Carbons Metal Carbon Fusible Carbons 17 ! 15 ! 17 ! 15 ! 17 ! 15 ! 17 AA,3.5x1.0x5.7mm,1500 Video PCB PartsLJP1 VID VID+H/S Others Different Parts List CDT Memo Block Block Diagrams Main PCB Wiring DiagramSmps Part Schematic Diagram Schematic DiagramsSchematic Diagrams Micom Part Schematic Diagram DP15H*/DP17L 10-4 10-3 H/V OSC & Vertical Part Schematic Diagram DP15H*/DP17L 10-6 Deflection Part Schematic Diagram DP15H*/DP17L 10-8 Video Part Schematic Diagram DP15H*/DP17L 10-10 10-11 DP15H*/DP17L Code No. BH68-00129A

DP15HS/HT, DP17LS/LT specifications

The Samsung DP17LS/LT and DP15HS/HT are modern digital displays designed for commercial and professional use, showcasing cutting-edge technology and versatile features that cater to a variety of applications. These models are part of Samsung’s commitment to innovation in display solutions, offering impressively vivid visuals and reliable performance.

One of the standout features of the DP17LS/LT and DP15HS/HT is their high-resolution display capabilities. The panels are engineered to deliver sharp and detailed images, making them ideal for advertising, information kiosks, and interactive displays. With a brightness level that exceeds industry standards, these models ensure visibility even in brightly lit environments, allowing content to stand out and capture attention effectively.

Both the DP17LS/LT and DP15HS/HT models are equipped with advanced LED technology, which not only enhances color accuracy and contrast but also provides energy efficiency. This makes them a sustainable choice for businesses looking to minimize their ecological footprint while maximizing visual impact. Moreover, the ultra-narrow bezels of these displays allow for a seamless multi-display setup, enabling businesses to create an immersive visual experience.

Another prominent characteristic is their user-friendly interface and connectivity options. The displays support multiple input types, including HDMI, DisplayPort, and USB, ensuring compatibility with a wide range of devices and systems. This versatility simplifies integration into existing setups and allows for easy content management.

The DP17LS/LT and DP15HS/HT models also incorporate advanced cooling technology to maintain optimal performance during extended operation, minimizing the risks of overheating. This is particularly crucial for environments where displays are running continuously, such as retail stores and transportation hubs.

Furthermore, Samsung’s commitment to durability and longevity is evident in the design of these displays. Built with high-quality materials, they are resistant to wear and tear, ensuring that they remain operational even in high-traffic areas.

In conclusion, the Samsung DP17LS/LT and DP15HS/HT displays stand out as reliable solutions for businesses seeking high performance, vibrant visuals, and robust features. Their combination of cutting-edge technology and practical design makes them an excellent choice for a variety of commercial applications, where quality and efficiency are paramount.
Top Page Image Contents